WTB RobbMC dowel pins

[ChargerST]

I'm looking for RobbMCs dowel pins. Not sure which size I need so I'd like to have all of them before I start the alignment procedure. Since I have a lakewood bellhousing I assume I probably need a .014 or .021 offset..

Thanks

 

[493 Mike]

I'm looking for RobbMCs dowel pins. Not sure which size I need so I'd like to have all of them before I start the alignment procedure. Since I have a lakewood bellhousing I assume I probably need a .014 or .021 offset..

Thanks

Did you check RobbMc's web site?
Mike

 

[ChargerST]

I did an I remember them being much less ($40 for the pair) and ordering 3 pairs is quite a lot of dough for dowel pins. I figured someone on the board has previously ordered different offsets and might get rid of the dowels he didn't need.

 

[blue_stocker]

Ebay, Jegs and possibly Summit for $27 pair...

 

[hunt2elk]

Ebay, Jegs and possibly Summit for $27 pair...

But those are for Ford and measure .500". RobbMC is the only place to get the correct for Mopar .496" offset dowels, as far as I now anyway.

 

[blue_stocker]

Pins in a lathe or drill press and a good file takes care of .004" pretty easily and quickly...
This isn't rocket science!