Standard transmissions that work with the 440?

[Dallasdrifts]

I'm looking for standard tranny for my 440 I would really like to find one with a hydraulic clutch but haven't found anything on my own. Any help is appreciated thanks

 

[Dennis H]

Tremec.

 

[5.7 hemi]

American Powertrain has a hydraulic throw out bearing set up for the A833 trans. It's pricey, but you get everything to do the job.

 

[69Runner]

American Powertrain has a hydraulic throw out bearing set up for the A833 trans. It's pricey, but you get everything to do the job.

Was thinking the same thing, this is a conversion kit that replaces the z-bar with master and slave cylinders but retains the clutch fork. IIRC others on this site have converted to hydraulic clutches and they will probably chime in.

http://www.brewersperformance.com/proddetail.asp?prod=HYD

 

[SlinktRR]

I'm looking for standard tranny for my 440 I would really like to find one with a hydraulic clutch but haven't found anything on my own. Any help is appreciated thanks

Why not use a diaphragm clutch? Pedal effort is not that bad, feel is good.

 

[Dennis H]

No hydraulic clutch on my TKO. Standard. Best feel, resistance, and performance ever. Over 50k miles.

 

[Dallasdrifts]

Anything out there I may be able to find at a wreckers?

 

[cryplydog]

Mopar Action magazine had a writeup using parts off of a dodge pickup! I don't remember what year or month, but you can go to mopar action .com