Tail lamp assembly removal

[md71631]

The silver paint is coming off the plastic on my 64 Polara's backup light assemblies. I took the small 3/8" nuts off inside the trunk but it seems to be very firmly in place.... what other bolts or clips are holding these individual light assemblies in place? I ran searches on here but no joy...... thanks....

 

[R413]

Do they look like these?

The entire panel needs to be removed from the car, then the individual lamp removed from the panel with Phillips screws.

 

[RemCharger]

The silver paint is coming off the plastic on my 64 Polara's backup light assemblies. I took the small 3/8" nuts off inside the trunk but it seems to be very firmly in place.... what other bolts or clips are holding these individual light assemblies in place? I ran searches on here but no joy...... thanks....

I have the same project lined up and haven't done it yet, but it appears the Phillips screws are accessible through little cutouts in the corners..

 

[md71631]

Thank you.... will get started on that right away....

 

[RemCharger]

Thank you.... will get started on that right away....

Report back!