Take off A ya hoser
- Thread starter bigmanjbmopar
- Start date
- Local time
- 11:56 PM
- Joined
- Jan 16, 2011
- Messages
- 74,377
- Reaction score
- 114,467
- Location
- NorCal Sierras
Just Nail It Already, Eh
That Blown Alky 69 RR looks Bad A$$ for sure, I don't know why he doesn't nail-it, he said "he' still getting use to it", but why would he post a video on Youtube of a lame attempt like that, freaken hammer that damn thing, if it blows the tires off, then get out of it, the chassis will never work properly at part throttle... I think that's an older build, from a couple years ago, there is a guy on www.CanadianStreetCar.com forum, that had one just like that, if that isn't actually the same car, I haven't been their in a while, so I'm not sure if it's the same guy or not...
That Blown Alky 69 RR looks Bad A$$ for sure, I don't know why he doesn't nail-it, he said "he' still getting use to it", but why would he post a video on Youtube of a lame attempt like that, freaken hammer that damn thing, if it blows the tires off, then get out of it, the chassis will never work properly at part throttle... I think that's an older build, from a couple years ago, there is a guy on www.CanadianStreetCar.com forum, that had one just like that, if that isn't actually the same car, I haven't been their in a while, so I'm not sure if it's the same guy or not...
65hemi
Well-Known Member
- Local time
- 1:56 AM
- Joined
- May 21, 2011
- Messages
- 1,307
- Reaction score
- 3,959
- Location
- Winnipeg, Manitoba
The guy with the alky RR runs at our track in MB.
Here is a buddy's Satellite; not scared to throw the nitrous at it.
http://www.youtube.com/watch?feature=player_detailpage&v=bkGD3JITfb0
Here is a buddy's Satellite; not scared to throw the nitrous at it.
http://www.youtube.com/watch?feature=player_detailpage&v=bkGD3JITfb0
Al K
Well-Known Member
- Local time
- 1:56 AM
- Joined
- Nov 15, 2009
- Messages
- 2,116
- Reaction score
- 612
Bloody Hell! That's one damn impressive car-with a Wedge,no less! I DON'T like the wheel geometry upon landing-something's going to snap at some point. Hate to see your friend get hurt due to breakage.
Homstead
Well-Known Member
Wow! I`ve been to both those tracks when I lived there and those videos brought back some good memories. Thanks for posting them!
- Local time
- 11:56 PM
- Joined
- Jan 16, 2011
- Messages
- 74,377
- Reaction score
- 114,467
- Location
- NorCal Sierras
All Aluminum 580ci wedge on N20
Cool 70 Sat., don't get me wrong I do like it, BUT you would think with a all Aluminum World Block @ 580ci 4.5" stroke & 4.530" bore, w/Brodix B1 heads, a Holley Dominator, home made CalTracs that obviously work well & 2) N20 kits, it should be much, much faster than 9.21 on the juice, you would think even at 3900lbs on drag radials, even if it's, all steel & in street trim as they say...
Cool 70 Sat., don't get me wrong I do like it, BUT you would think with a all Aluminum World Block @ 580ci 4.5" stroke & 4.530" bore, w/Brodix B1 heads, a Holley Dominator, home made CalTracs that obviously work well & 2) N20 kits, it should be much, much faster than 9.21 on the juice, you would think even at 3900lbs on drag radials, even if it's, all steel & in street trim as they say...
b-star69
Well-Known Member
sick
RamNBee
Well-Known Member
Both are great cars and I would love to have something half as fast. I'm with you Bud, as much spray as on the Sat, I would have thought hi to mid 8's as it went 9.70's on motor. Still mighty impressive!
Similar threads
