FOR SALE Three 1963 Dodge cars, 330, 440 and Polara

[super-bee_ski]

Selling my 1963 Project "Max Wedge" clone car and the 2 "Parts Cars".
Steal the Deal for $12,000

Car one: 1963 Dodge 330, needs floor pans and body work. Original 6-cylinder car.
This is the Car from South Dakota I purchased from the Van de Brink auction.

Car two: 1963 Dodge 440 4-door, 318 Poly, automatic car. This car is a driver, good shape, I picked up in Whitby Island, Washington.
A true Grandmothers car form original owners family. White with red interior.

Car three: My 63 Max Wedge Clone Polara.
Super-bee_ski's 1963 Dodge "Max Wedge" clone resto "Round-2"
This car has over $8,000 in body work and prep including: Complete Soda Blast to bare metal. High Quality paint job "Black". This car is a a "Roller". This car includes an original "Tyn Man" Factory metal Max wedge hood scoop. The scoop cost me $1,000 in 2004 from "Joey" the "Tyn Man" out of Michigan. He is not making them anymore.
Also: This car has original CA Black plates, and it comes with an original 1963 Max Wedge
1-3/8" small stem pinion (aka. '741'), 3:91-1 Ratio.
Along with a New engine Harness from Evans wiring Harness and a "Evans" Front Headlight Harness.
Also: Four 1963 Rare Polara grilles, "One" fully restored by 5.7Hemi (Zack)

Also: Possible with deal comes a 440 based "426 Max Wedge Clone engine" and top line TTI headers, Engine built by Dale Reed, Ex NHRA racer and builder of ALL of Bob Mosher Mopar engines, Baldwin Park CA..."Dale's Place"
Also: Pro Built 1965 "727" trans with Hughes convertor (New)


See pics.

Car one: "Van Der Brink auction" car:

Car two: "Whitby Island, An original owner "Grandmother's car", drive it away!

View attachment 839245

 

[super-bee_ski]

Car three:
PS: that is a reflection of the garage door opener on the trunk lid.

 

[super-bee_ski]

Car three:
My reflection in paint job.

 

[super-bee_ski]

Possible Engine and trans with Cars, more money of course!
Dale Reed Built 440/426 "Max wedge engine"
This engine is Blueprinted and Balanced...best of everything.
(With Dale Reed)

 

[super-bee_ski]

Engine and Trans: $10,000
Fully blueprinted/balanced/documented By Mr. Dale reed (see pics above)

 

[super-bee_ski]

More:

As you can see, the A&A trans Max Wedge manifold is over $3200
The receipt for Mr dale Reed is over $7,200
The TTI headers are $1,000 (Bob Mazolinni racing)

View attachment 839327 View attachment 839329

 

[super-bee_ski]

Non-op status Black Plate car

 

[super-bee_ski]

I actually have "run out of the sand in the hour glass so to speak" as I started the Black 63 project in 2003 and lost 2X at Paint Body Shop prison with a loss of in excess of $8K
The White car was going to be a parts car, but too nice to dismantle
The Blue car was the "new" parts car, shipped in from South Dakota...
But I'm too old now, focusing on the 69 SC/Rambler and the 70 Superbee

 

[super-bee_ski]

So:
To clarify for potential buyers....
Please remember, I purchased the White car to use as a Parts Donor car as the 2 Shops lost parts, or simply put: "Paint Shop Hell"
The White car was (is) too good the part out
SO: I found the Blue Car at the Famous South Dakota "Muscle car Hoard" that was auctioned by Yvette Van Der Brink, Van Der Brink auctions...South Dakota
See pics:

 

[super-bee_ski]

Forum members:
I'm receiving many PMs, some supportive and sincere about purchasing the 63s
Some quite frankly "Troubling"
One Forum member is telling me the PISc are Bad, not enough pics.
PLEASE:
Do not be lazy, click on the Link provided above:
OR --->Super-bee_ski's 1963 Dodge "Max Wedge" clone resto "Round-2"
IF this is not enough pics for you...I don't know what to do.
1. This "SALE" is not for me to "get money cuz I need money"
(I don't need money, I have 16+ vehicles, I am downsizing.)
2. If you can not afford it, move on.
3. I may possibly sell the Blue 330 and the Black Polara
BUT: I'm not going to "Give it away" because shipping cost too much money.
Yes, I know, I have over $4,500 in shipping for the 2 "Parts Cars"
Some members are offering $6,000 for the Blue car and Black car
NO, it does not work that way.
I'll crush them before I give them away.
I have been specific throughout there Threads....the Black Car is missing all hardware and more
YOU NEED another Parts car.
If you can not afford it, do not bother.
Finally, I have already told one "interested" party I will not sell to him.

 

[super-bee_ski]

Fellow forum members,
Thanks for comments and guidance/support.
So: anyone needing clarifying on details, please feel free to discuss with me through PMs.
To clarify and clearly define one more time:
PICs are "Great" and "Many"
Especially if you do the research and check out the initial thread/provided link:Super-bee_ski's 1963 Dodge "Max Wedge" clone resto "Round-2"
Some of you say wether there is a Steering wheel and Steering Column etc, yes, clearly depicted in numerous pictures.
And furthermore, if you "cling" the Link, you will see much more detail.
I purchased the "parts car (s) because when Phoenix Autobody went Bankrupt and closed, many many parts, hardware was missing.
You need another 63 to accomplish this build.
Good luck to you all, I'm not in a rush to sell.
Thanks again.
Remember: PMs will work.

 

[super-bee_ski]

More pics coming of the Blue 330 Post Car and the White "440" Car along with the Black car (Polara)