Tie Rod End Sizing

[darc1722]

Was going to order some new tie rod ends from PST , because of their sale pricing. Car is in storage, is there an easy way to confirm if the thread is 9/16ths or 11/16ths? My car is a 1969 Roadrunner with a 383, stock front end. Was hoping I don't have to go to storage facility to check.......

 

[Sixtynine_Bird]

9/16ths I just bought some new one for 383 69 runner. If you want it stock take the 9/16ths but if you to upgrade it you can take the 11/16ths bt you will have to change the sleeves too in consequence.
so stock sleeves = 9/16ths tie rod end
if I'm wrong can someone please correct me.

 

[moes]

yep, 9/16ths tie rod ends for stock and yes, you can use the bigger 11/16ths tie rod ends from C Body cars for an upgrade. You will have to get the bigger sleeves for the 11/16ths tie rod ends. I did this upgrade on my 70 Sports Satellite

 

[PST]

We have a large inventory of parts. We have many parts made for us as well as having them sourced from other manufacturers. For example we have our torsion bars, leaf springs , polygrapite bushings, strut rods and pivot shafts made in the USA. Then other components but not ALL are made oversea. We have been in business for over 30 years and built our reputation on quality parts. All products that we sell are made to meet or exceed oem. We are very picky in our sources that we use to manufacture our parts and maintain high standards of quality control. Many of the products that we offer we even sell to other vendors as well. All products that we sell are back by a life time limited warranty for as long as you own your vehicle and can tell you that the poster above does not offer that. If you have any questions about our product please contact me.

Thanks
James From
PST Marketing