• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

TKX Conversion - Slave Cylinder .625 vs .750

Charlie Brown

Well-Known Member
Local time
4:41 PM
Joined
May 23, 2021
Messages
222
Reaction score
275
Location
Vars, Ontario, Canada
Last bit of homework before I order a complete TKX kit from SST.
I like the idea of a shorter throw (.750) pedal but at the expense of a harder pedal. I know the "feel" of a harder pedal is hard to describe in words but I'm throwing this out to anyone who has experience with both the .625 and .750 units - How much harder / firmer is the larger bore over the smaller one. As an aside, I'm likely to order a Wylwood unit instead of the generic unit supplied by SST.
 
I've worked on a couple with the Wilwood .75 cylinder... Pedal is a lot lighter than a stock mechanical linkage... Don't bother with the .625
 
Auto Transport Service
Back
Top