tube bending video

[Pops1967GTX]

The possibilities ......


[video=youtube;yigRgG_NIyU]http://www.youtube.com/watch?v=yigRgG_NIyU#at=19[/video]

 

[Budnicks]

The possibilities ......

Very cool.. That thing is amazing, imagine all the cool stuff you could fab up with one of those, I could imagine how pricey it would be too...

 

[plymouth67]

That's what I do. I'm actually in charge of one of our bending depts. We have 19 cnc tube benders we bend .12 diameter tube all the way up to 6.00 inch tube...We do it all!!!! Made a lot of cool stuff over the years...

 

[Richard Cranium]

That'll be handy down at the trombone plant.

 

[MarPar]

very cool!!

 

[Hemirunner]

That's what I do. I'm actually in charge of one of our bending depts. We have 19 cnc tube benders we bend .12 diameter tube all the way up to 6.00 inch tube...We do it all!!!! Made a lot of cool stuff over the years...

So, a CNC bent 1-5/8" x .083 wall roll cage would be no big deal.?? Hmmm......................................lol

 

[Budnicks]

Yeah there are some things going thru my mind about, a chassis or cage, I think I'm going to have an aneurysm thinking about all the cool stuff you could do, especially on a race car fab, minimal welds, tube chassis, dragster or altered, but would need to have the knowledge & be able to program a computer design, for the CNC bender, but think of all the possibilities, just for racing applications & the strength of the final product...