• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

wanted lower front fenders

moparcuda

Well-Known Member
Local time
12:23 AM
Joined
Nov 19, 2013
Messages
253
Reaction score
48
Location
quebec.can
Look for both side lower path panel for a 1962 dodge dart front fenders (rear the front weel) in no rust condition, show me what you have
 
The guards themselves are extremely hard to find period.And in almost all cases that area is usually rusted (as it see's the water from the windscreen cowl).
If this area isn't rusted the whole fender will be expensive.
I have seen nos ones for $1k each and rusted ones around $500.
You would be best to try and repair yours .
Good luck
 
just trying to find Something,if i not find i will repair my fenders

démon et dart 002.jpg
 
The guards themselves are extremely hard to find period.And in almost all cases that area is usually rusted (as it see's the water from the windscreen cowl).
If this area isn't rusted the whole fender will be expensive.
I have seen nos ones for $1k each and rusted ones around $500.
You would be best to try and repair yours .
Good luck
Here at Sled City Fiberglass, we sell the 62 Dodge front fenders for $400 each. We only do parts that fit the 62-68 Mopars.
 
My car was brought to Canada for that exact reason,to get the front fenders off of it. His old fenders weren't that bad,so I'm fixing them and putting them on
 
Easy to make patch if the lip is still there. Made these rears. Made the curved edge and lip as well. Wasn't that tough.
Doug

0407091316a.jpg 0407091317.jpg
 
Last edited:
I have a nice pair of 62 Dart/ polara fenders but shipping from NW kills off any sale. I doubt a $1 each would make a sale happen to Quebec.
 
I have a nice pair of 62 Dart/ polara fenders but shipping from NW kills off any sale. I doubt a $1 each would make a sale happen to Quebec.
my fenders are very good just l the lower have to be repair if i dont find a lower part i will make my patch ,i just want to save time,,,,
 
I don't know if the '62 Dart is similar to a '63 Dodge 330/Polara, but Mills Supply offers the lower front fender patches. They are not AMD quality, but a good starting point where you may be able to make them work. Not real expensive either...Good Luck on the repairs
 
Auto Transport Service
Back
Top