what interchanges for 71-74 Satellite/GTX/Roadrunner?

[djais1801]

i plan on freshening up my RR Clone over the winter and am looking for the following...please let me know if this is interchangable so I can broaden my search if need be:

Trunk lid (i believe is)
Doors

I might also add the air grabber to my original hood, would any other model/yr fit the stock hood in that center section?

thanks in advance

 

[moparmarks]

Deck lid is the same for 71-4 Plymouth except 71-early72 has wing cut outs. 73/4 has larger lock cylinder
Doors are 71-2 Plymouth only.
A/G hood is 71-2 Plymouth only for the bubble and door. Under hood duct is 70-2 Plymouth and 71-2 Dodge. Air cleaner is 70-2 Plymouth and Dodge.

 

[djais1801]

i knew i could count on you for knowledge!! THanks!

Deck lid is the same for 71-4 Plymouth except 71-early72 has wing cut outs. 73/4 has larger lock cylinder
Doors are 71-2 Plymouth only.
A/G hood is 71-2 Plymouth only for the bubble and door. Under hood duct is 70-2 Plymouth and 71-2 Dodge. Air cleaner is 70-2 Plymouth and Dodge.

 

[moparmarks]

Always happy to help.:toothy12:

 

[YY1]

may not apply to Plymouth, but for Dodge, only 74 trunk lock is different, 71-73 are the same.
wing mounting points are only on inner skin IIRC.

 

[moparmarks]

may not apply to Plymouth, but for Dodge, only 74 trunk lock is different, 71-73 are the same.
wing mounting points are only on inner skin IIRC.

Actually ALL Mopars, Dart, Charger, Satellite, ect went to the larger lock cylinder in 73.
Books shows same part numbers for 73-4 Deck lid and cylinder.

 

[moparmarks]

Here are the lock holes. 73-4 on the right

 

[YY1]

Hmm, I'll have to compare my 73 and 72.

The 74 was very noticeably different.