Windage tray?

[Doba76]

Possible silly question, just warning you all now! Do the later big blocks have a factory installed windage tray? I need to swap oil pans from my old 400 to the "new" one and in looking up the pan gasket, it says use 2 with windage tray. Thought I'd check before ordering.

 

[PurpleBeeper]

That is correct.... you need one gasket below the windage tray & one gasket above the windage tray so the tray is "sandwiched" in between.

 

[Challenger340]

Or you can purchase a resin fibre one piece Windage Tray with integral sealing surfaces(no Gaskets required) for ~$50.
from
Magnum Gaskets under Part #OS84011 Std or OS84012 Stroker
Also carried by Jegs & Summit I think under their own numbers ?

See Here on Page #6
http://magnumgaskets.com/pdf/Performance-Catalog.pdf

 

[Doba76]

That is correct.... you need one gasket below the windage tray & one gasket above the windage tray so the tray is "sandwiched" in between.

Gotcha, but the 400 doesn't have a windage tray from the factory, right?

 

[A383Wing]

Gotcha, but the 400 doesn't have a windage tray from the factory, right?

no, they did not