• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB: 225 Slant Six unsilenced air cleaner

Status
Not open for further replies.

Montclaire

Well-Known Member
Local time
4:01 AM
Joined
Nov 15, 2011
Messages
1,557
Reaction score
433
Location
Scranton, PA
Feedback: 1 / 0 / 0
Looking for an air cleaner for a slant six like the one below. This is the unsilenced style, which I think was used 67-72, and has the nipple for the oil breather line. I think it takes a 9 inch filter. Needing paint is fine but no rust or dings/dents. Don't need the base plate.
PM through the board
Thanks

5635860003_large.jpg
 
Here, again, is the info I provided to you on FABO about this air cleaner:

It is not an unsilenced air cleaner (by any definition, including the factory's). It was used on some but not all passenger car slant-6 applications from 1961 to 1969. The 1961-'63 covers have no crankcase breather nipple. The crankcase breather nipple first appeared in '64 on the California cars, then in '68 in the other 49 states and Canada. The '69 baseplates have a small nipple for the throttle plate anti-ice air inlet.

The same cover was used on the unsilenced 2bbl air cleaner on '65-'66 Barracudas, and (with chrome plating) on the 4bbl setup as well.
 
cleaner top

I have what you are requesting. see photo
 

Attachments

  • DSCI0033.jpg
    DSCI0033.jpg
    77.3 KB · Views: 657
I sent you a PM with the link i have 4 of them for sale $10 and up
 
Status
Not open for further replies.
Auto Transport Service
Back
Top