65 roof rail weatherstrip

[dadsbee]

 

[65PlymSatellite]

I am installing the same seals in my 65 Coronet. In your picture what holds the seals past the end of the stainless channel?

I got my car with all of the trim removed and in boxes so I am not sure if I have everything. It seems like something is missing between the end of the channel and the windshield molding, like in your picture C&P below.

View attachment 1826575

Were your Drip rail moldings off and boxed too? If so, how was it installing them? I want to remove mine for polishing, but have heard those clips don't grip the same once removed and the moldings aren't as secure.

 

[493 Mike]

Were your Drip rail moldings off and boxed too? If so, how was it installing them? I want to remove mine for polishing, but have heard those clips don't grip the same once removed and the moldings aren't as secure.

I removed mine for polishing and found some rusted out clips. I believe I purchased some replacements from Joe Suchy and it was difficult fastening them on as they weren't identical in design. Just be aware!
Mike

 

[168BTHPM]

Were your Drip rail moldings off and boxed too? If so, how was it installing them? I want to remove mine for polishing, but have heard those clips don't grip the same once removed and the moldings aren't as secure.

Yes my drip rail moldings are removed. I have not tried to install them yet.