Search results for query: *

You can be the FIRST! It won't sound like a header equipped car. Mike

My guess is door latch. It appears to be a broken part. Perhaps from the lock mechanism. Mike

I finished the replacement Delrin throttle valve for my CP Pacesetter DA and want to report it works great. Mike

While I was prelubing the engine for first start was when I saw the oil gushing into the oil pump drive area and realized I missed a plug.

I missed the inner plug on my 318 poly rebuild (I let the machine shop pull the galley plugs as my tool broke). It is in the rear under another plug! I was able to install the missing plug through the distributer hole in the block! Engine was in and started-low oil pressure was the result. Mike

Hammering on the axle in place can damage the tapered roller bearing. Remove the axle and press them out. The drill may have worked to remove the tension and weakened the fit but, the holes must be centered and opened up to the root diameter of the splines of the stud. Mike

The part has been discontinued by CP. Mike

No steel shim with aluminum heads. Did the head manufacturer not recommend their choice of gasket? Mike

That could be the correct part! Where can I find it? Thanks! Mike

It has disintegrated. I decided to make one though. First attempt proved I can make it work, so I'll change some dimensions tomorrow. I am using Delrin plastic and my lathe. Thanks for the response. Mike

OEM starter relay connector. Mike

Hi fellas, The air inlet throttle valve on my DA broke. Has any one found a replacement part? CP has discontinued production of this little plastic item. KF124233. Mike

Ma Mopar put the port in the intake for a reason. It works in millions of engines. The intake location is a better choice. Plug fouling is just a coincidence and bad luck. Mike

What is your definition of a driveline? Mike

They made 10s of thousands of RRs. Do what you need for your comfort. In a few years our cars will not be worth squat. Keep enjoying yours as long as possible. Mike

Time. Mike

I've found that black weatherstrip adhesive works well. Mike

I had them on my snowmobile trailer for years with good results. No use is harder on steel than Michigan winter roads. Mike

I paired a 727 (reverse pattern manual VB) with a GV OD for my 65 with 750# torque. 3.55 gear. Mike

Yes. Mike