Search results for query: *

Not brutal, it's known in the community the repop turn signal switches are mostly junk. Just honesty.

Does the nut have the proper thread pitch?

Towed 1000 miles twice this year. Straps through the rims on all 4 wheels straight to the trailer D rings. Car didn't move a bit even on Indiana's roughest roads.

Those GM E body rear calipers were junk back in the day. If you don't regularly use the Emergency brake, the pistons freeze up on the adjusting screw causing a low pedal and poor braking performance.

The control arm bolt is pressed into the bushing. It is not a thru-bolt, and that shoulder does not hold anything in place

Thorpes Corvettes - O'Fallon, IL Biggies - Waterloo, IL Both very good and expensive

Post a picture of the inboard bearing in the rotor before the seal is installed.

Nothing, you've already got enough stuff that doesn't run.

If it makes a difference this is for a drum/drum manual brake system.

Looking to purchase 4 master cylinder attaching studs for 69 RR. I know I can use regular bolts or Polaris wheel studs, but just seeing if anyone has any used they want to sell. Thank you.

You really need a constant source of vacuum. A hand pump will not get the job done.

I agree with Dad, this particular supplier is not making a Lead acid battery. Using the proper tender sparingly will make them last even longer. Worth the money if you can get him to make one for you.

Pretty sure the supplier is Jim's Battery Mfg. who took over for Antique Auto Battery several years ago. I bought a Ford battery directly from him back in 2021 and at that time it seemed like the business was standing on a banana peel.

For the heater hoses, I use a valve in each hose on my 69 RR with factory air. I used ball valves for PEX piping. To make things look a little nicer I take the handle off the valves after I get them open or closed for either the winter or summer.

+1 for local spring shop. Mine came from St Louis Spring look and fit great. Ordered them in afternoon, ready for pickup the next day.

Thank you.

No, I will not be at Carlisle

Looking to buy good or better used OEM complete stainless trim for back glass. Does not need to be perfect but would like nice pieces. Trying to avoid potential nightmares with aftermarket trim. Thank you.

Yes. One of the best things I've ever done.

Crazy as a Fox!