• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. E

    Aluminum water pump - bolt heads hit pulley

    I believe its an Edelbrock pump. Same issue with a proform pump I got from Summit. They all look the same, (probably from the same Chinese manufacturer.)
  3. E

    Aluminum water pump - bolt heads hit pulley

    The flange is thicker on the aluminum pump.
  4. E

    Aluminum water pump - bolt heads hit pulley

  5. E

    Aluminum water pump - bolt heads hit pulley

    The distance from the pulley mounting surface to the front of pump housing is shorter than on the OEM cast iron pump.
  6. E

    Aluminum water pump - bolt heads hit pulley

  8. E

    Aluminum water pump - bolt heads hit pulley

    I have a 1970 440 and I purchased a "Mopar Licensed" aluminum water pump housing and water pump. The pump mounting flange is cast thicker than a stock cast iron unit. The heads of the pump mounting bolts now hit the back of a stock steel water pump pulley. Has anyone else run into this problem...
  9. E

    What Carb do I need

    With 3:73 gearing and a manual trans, a well tuned 750 or 800 cfm double pumper will do well for street/strip.
  10. E

    What Carb do I need

    Here's a very important tuning item especially if running a bigger cam; Measure your intake manifold vacuum at idle with warm engine. What ever the reading is, make sure your power valve in the carb is set to open at least 1 "Hg lower. Big cams usually result in low manifold vacuum and if the...
  11. E

    1970 440 aluminum cyl head recomendations

    I have a 65 Coronet with a 1970 440. I'm running headman long tube headers and stock 906 cast iron heads with "straight plugs." I was considering E-Street Cylinder Heads for Big Block Chrysler Part Number: 350-5090. Here are my concerns. These heads have angle plugs and are rumored to have spark...
  12. E

    15 volts running & idling. What's wrong?

    Have the battery checked, if its sulfated it basically refuses a charge and pushes back with a high volt reading within the veh electrical system. It means the batt holds a light surface charge but cant supply deep cycle cold cranking anymore.
  14. E

    SOLD B body 66 steering column with column shift power steering

    OH never mind. I took a closer look at your pics on a PC. It does have the collapsible mesh sleeve. It wont work for a 65. thanks
  15. E

    SOLD B body 66 steering column with column shift power steering

    Your photos of the column show it doesn't have the collapsible mesh sleeve so its probably not a 67. The firewall mount plate has four holes and a 65 has only 3 holes, so it looks like a 66 vintage. I have a 65 Coronet with a 1970 727 and the wrong year steering column. I purchased what I...
  16. E

    WTB WTB 65 Coronet Parts

    Looking for: Column shift lever (P/S if it makes a difference) L/R quarter glass chrome + weather strip (for convertible) Tail lights
Back
Top