Search results for query: *

Sold

Set of 70 Charger fenders for sale located in Vancouver BC. Decent shape, extra set I don’t need kicking around anymore. $2700 CDN obo.

Passenger side

Drivers side

Set of 1970 Charger fenders in good condition for sale. Extra set from my build that I didn’t use. If you’re a serious buyer I can get better photos, they are deep in the crawlspace. Located in Vancouver, BC. $5200 CDN obo.

Looking for one of the small rear headliner bows for a 70 charger, if you have one to sell let me know.

Looking for a set of clips for the small rear headliner bows for 68-70 charger. Will buy the bows complete if not wanting to separate. Getting reading to install my headliner and realized one side is broken.

Looking for horn pad switch/retainer and hardware for a ‘70 plastic 3 spoke wheel with half ring pad. Have the pad and steering wheel, but car didn’t come with anything between wheel and pad so not quite sure what all is needed. Thanks, any help is appreciated.

Thanks for the replies, rereading my post I should have been more clear on the seals I need. They are the foam seals inside the column. One goes just above the bottom white plastic bushing on the column lock tube. The other is smaller and goes inside the end of the lock tube. Apparently they...

Almost finished my steering column and realized there is 2 foam bushings I’m missing. DMT sells them, but was wondering if anyone has used anything readily available with any success? Or maybe didn’t replace them and had no issues? Thanks for for any suggestions and help.

Perfect I appreciate the help, I’ll just remove the wire and move on.

Does anyone know if a 70 column shift ignition switch will work in a 70 floor shift column? My charger didn’t have a switch in it when I got it, but I do have an extra column shift steering column with one in it. If so do you remove the gear selector wire from it? Thanks and I appreciate any help.

Bump....still looking for this washer.

here is a photo from another members post, the spring washer I need is the top one.

No sorry

8 track bezel found. Still looking for latch if anyone has extra and wants to sell.

Has anyone used they’re linkage without it and not had any problems?

Looking for the spring washer that goes in the 3 speed wiper motor linkage for 70 B body. I have the bushing and retainer, but no washer. If anyone has one they’re wanting to sell I’m interested. I’m assuming it’s there to create tension, but maybe not needed? Thanks

All good, no worries!

Great thanks for the photos Kern Dog and Ray70Chrg, looks like the 2 grommets are close enough to almost touch. Should be able to figure out location to drill the hole from them.