Search results for query: *

Unplug the wire that goes into to U terminal and the fuse holds

Appears to be in my front marker lights. Disconnected the harness from the firewall and the fuse held. Ohmed the wires. .5 on the 200 ohm setting on the meter. Dont see any melted or bad connections

Thanks, I GOT SMOKE When I put the new fuse in and turn the light switch on, the fuse doesnt pop instantly it slowly heats up the filament turns red melts. The end of the fuse lead that has both the pink wire to the headlight switch and the red wire to the cig lighter is the end that smokes...

Thought I'd start a new thread 69 superbee Rallye dash My 20A tail fuse keeps blowing when I turn the headlight switch from off to either park or on. Both positions will blow the fuse I have disconnected the rear taillight harness I have disconnected the parking lights Cig lighter works and...

Sorry, I misunderstood. YES, blows fuse in when headlight switch is in park position.

Yup, pulled the plug for the tail harness. Still blows

Thanks for all the replies... Keep em coming The car is a 4 speed no park position. I'm blowing the 20A tail fuse. If I'm quick I can see the tail lights glow before the fuse blows. Yes, I disconnected the tail harness and it still does it. I dont get it, there are only 2 wires to the circuit...

Can anyone tell me how to ohm test my light switch and dimmer switch on a 69 Rallye Dash? When I turn on my headlights it blows the 20A tail light fuse. I have isolated the rear harness, unplugged cig lighter and ohm tested pink wire to headlight switch and cig lighter wire and they test good...

Latest issue. Power to both ends of the 20A fuse labeled Tail lights/cig lighter. I have No brake lights, instrument lights or cig lighter. Headlights, brake lights, turn signals, and flashers all work. What Now? Thanks

Having a major pilot bushing problem. A standard .094 outside diameter pilot bushing fits loose in my crankshaft, I can pull in in and out with it on my index finger. Best I can tell, the crank inside diameter is about .095-.096. I decided to order the roller bearing from Mancini that installs...

Do you know what your backspace is?

Or just the 295/65/15 in general. Wondering about fitment issues

I am wondering if anyone is running this combination - 295/65/15- Mickey Thompson ET Street Radial with American Racing Torque Thrust 10" rims with 5" backspace on a 69 Bee? Too much snow to go in for a fitting. Thanks

That is the size I would like. Are the rims 8 or 10"? Do you know the backspace. I have 275-60-15 and they rub on the fender lips if you hit a big bump.

Thanks, do you get any wheel hop? What size are they?

I am wondering how hard these tires hook. I am thinking of putting a set on but I have stock springs with no traction bars and also air shocks for my ride height. Any guess as to wheel hop problems. Or should I stick to street tires. I am just tired of wheel spin.

Does anyone have any experience with these good or bad? I have a 69 Bee that is was going to set up with a set of Mickey Thompson ET Street radials. I am worrying about wheel hop. I have stock leaf springs.

I am going to upgrade my cooling system on my 69 Bee. Currently 525HP 4spd. I would like to switch to an aluminum radiator with either a single or dual electric fan set up with the shroud. There are quite a few companies hawking their wares. Who makes the best set up for the money? I want to...

Yes I have a schematic

I don't have a switch like that