Search results for query: *

Well it won't be the power steering pump. Could be a number of other things though. First thing I'd check is the bolts holding the steering box itself are tight. Also get someone to turn the wheel while you observe everything, coupler as mentioned, also pitman arm, tie rods etc. Jack the front...

Old thread revival, but here's the answer I got 40 years ago. Links are the same lenght, but the end kink on 71 up (and E) changes toe out on turns. Once you have lowered your car, or deviated from stock, I doubt it matters

1969 B-Body Disc/Drum Brake Master Cylinder, Distribution Valve, and 2 connecting brake lines. All New. Installed to check fit, but never used, and no brake fluid was run through the parts. Decided to go with aftermarket four-wheel disc system. $120

we went to take this out today. the vintage air unit is here too. we already removed the heater core part of the box with your help. the new unit fits right up there easily without removing the ac sode of the box. i just need to make an aluminum plate with 4 holes to go over the studs which...

What shape is the steering column coupler in? Sloppy steering after 50 years almost always points to a worn out coupler.

Hood to radiator support seal from 71 B-Body $30

Thats setup is crazy :BangHead:

If this is a highjack, moderators please delete. I cannot identify this distributor either. Any help would be appreciated. Shaft is the same length as a 440. It is the one with the white retard box. IBPI 3438351, which might not belong to this distributor, who knows? Thank you.

I have a 1974 Roadrunner. Has around 61k miles and the power steering seems to be very loose or floats if you will. Any thoughts on issues. New Power steering pump, gear box, or just take it some place and have everything checked including all the ball joints, ect.?

Gas tank straps for 71 B-Body $30

Ok cool thanks guys. Looks weird with that big hole in the front. But glad nothing goes there. Any recommendations for the shifter hitting the torsion bar?

Newest T when my 62 was built was 35 years old. My 62 is now 62 years old. My 33 is 91 years old. I wish I looked as good. Not sure I wanna get to 91.

Got down to the Oakland, California Pick-N-Pull wrecking yard this morning to get some parts off a 1965 Dodge Dart, that they set out in one of their Chrysler Corp. row of cars a week ago. Never been to that yard before, in all these years that i have been wrecking yarding. Wouldn't have found...

It is a dust cover and only installed on the rear.

It gave women easy access to my manly manhood.

What a difference 50 years makes. The stuff we considered rusty in the 70s would be top shelf today.

Torsion bars don't have bushings.

They're a little quieter than sticking a finger in one ear.

Hey guys, had my charger on the lift installing the Trans today. I noticed the torsion bars have a boot on the back side of the Trans cross member but none on the front side of the Trans cross member. Is that correct? Or did someone install the bars without the bushings. One other question...

1969 hemi roadrunner, car is disassembled for restoration. The car is solid but has rust . Car is complete less engine, Lots of documentation. I purchased the car from the original owner. The fender tag went missing during disassembly but have the build sheet,It is an automatic on the column...