Search results for query: *

It appears to be an aftermarket damper... Wide outer ring but the pulley mounting location is likely standard OE dimension... Some of those use removable weights in the back side so without removing it it's impossible to say... Treed by RemCharger...

I think the spacer is to long, the reason I thread the mast in early is to give me a way to hold the lower portion from above... The flats on the mast should be fully above bezel, in fact the piece the mast threads into should be exposed 1/8"-1/4"...

So, the curved rocker blades fit in slots in the base of the antenna, then that is installed from below the fender. I typically screw in the mast so I can hold the lower parts up from above the fender, then the top bezel keys into the two notches in the antenna hole in the fender & the blade on...

And just to clarify EB5 and GB5 are both medium blues but they are not the same color... The 71 color GB5 replaced the 69 color EB5

I recently pulled the 4:30's out of my 340 car... They were a lot of fun... And the car was driven from central Ca to central Tx with them so if you want to you certainly can drive it on the freeway..

Guy that assembled it was looking to get bombed when he got out of the plant.....

Very sorry to hear that... Gotta make the most of the time we have, never know when it might end...

Shorter spacer.... I've used over a dozen #4700 kits... I use the 69-71 brackets, they are easier to find... You have the 68 & earlier, use it... Just gotta have the right water pump, drivers outlet, there are two versions.. Early water pumps have the bolt boss below the thermostat these take...

I have one neighbor who smokes, just turned 40, his wife died three years ago of cancer, Doctor said smoking was a contributing factor.... Every morning I hear this guy hacking up a lung... He just doesn't seem to be able to connect the dots.... My family travelled around the world in a closed...

69 there is a bracket for low deck engines to move the hole up to the RB location... Upper left corner...

Never did..... Only one in my family that didn't....

Did you actually read that thread? Not a race block... R5 Small Block is a race piece... R5 on a 440.... Not a race piece... It's a 440, build your motor & don't overthink it....

Rock Auto has the whole catalog available on line... A few clicks & you'll have your part numbers... 1969 DODGE CHARGER 7.2L 440cid V8 Radiator Hose | Shop Now at RockAuto

Back in the 90's the real Aircraft Stripper was $19 a gallon.... Around 2000 here in California the real stuff went away, the green stuff appeared... It doesn't work.... By around 2018 the real stuff went away nation wide.... All there was is the green stuff... Save your $$$ it don't work...

Back in the late 80's through the mid 90's automakers were struggling with peeling paint issues... They guys at the body shop could strip 90% of a car in an hour with a couple razor blades... Doesn't work on well adhered paint... And you have to ne careful around inside curves, the blade can dig...

That is the green label version... Not the good stuff... More $$ but this one works... https://www.amazon.com/KLEAN-STRIP-Aircraft-Ultra-Paint-Remover/dp/B0D87SNTGC

Another reason I'm happy not to have Hagerty anymore..

TKO Shifters – Hanlon Motorsports Lots of vendors with lots of options...

Broke my 7UP Pop Machine today.... 47 pages of pain...

This goes back a few years.. Around 89-90, working at a Lincoln/Mercury/Honda dealer... A 75 Town car had been towed in... The tech working on it was told it wouldn't start... Nothing more.. He'd tried a few things & since the car was outside & it was raining, he decided to jump the starter...