Search results for query: *

Non A-12 content: Back in 1990 in Michigan I daily drove my GTX with a lift off hood, and had no indoor storage, no indoor parking, and no indoor place to work on the car. At all. Imagine the whole car covered with about 3/4 inch of ice at 5:00 am, you need to go idle in traffic for two hours...

Take it to MPD Welding in Lake Orion. They can fix it. https://www.mpdweldinginc.com/

I highly recommend a visit to the Packard Proving grounds if visiting Michigan. There have been some really great Mopar shows/swaps there in addition to other events, but there is a packard museum building with a cutaway vehicle and a good view and explanation of how things work, and a fellow...

Payment received, item is now sold. Thanks for the interest folks!

Things are crazy with these and I would suggest: Don't take my word for it, do an ebay search of completed listings and draw your own conclusions. In my humble opinion this design with either of the two color variants appears the highest priced and hardest to find in new condition. 500 seems...

Two very serious PMs received about it so far, I'm following first come/first served to try to be fair.

With prices being 500+ for new ones, I thought I would offer this survivor up at a reasonable price in case anyone needs one, doesn't want to pay a small fortune, and doesn't need absolute perfection. $100 including shipping in the lower 48. Also for sale on other sites. The closest...

Allrighty then.

Sale pending.

All cleaned out now. Thanks

I didn't and still don't have a windshield, but I used the rear glass to position the roof skin on my 69.

When you strip them, they're almost always worse than expected. Pinholes at the bottom of the door = The surrounding area is paper thin/a patch job to get by until rust shows up again, or door skins/rust removal of the door structure is needed if you want a top notch job. The patch on...

NOS Mopar Performance P5007140 Magnum R/T cylinder heads Stock/Super Stock legal per sanctioning body rules (please check to verify) Brand new bare castings, sitting on the shelf 20 years Detail as shown in the video. Hens Teeth. These were aftermarket general performance heads which underwent...

That Rebel is Kool! Nice work!!!

I Hate to pile on a Zombie thread, however I see this kind of thing quite often and wanted to chime in: "It was suggested above that I use a cheap Chinese $19 spray gun from Harbor Freight... Really?? I used a $200 Iwata gun." The comment to get a touch up gun is on point. LVLP is desireable...

No problem at all. Part of the trouble is, we're only measuring the opening, which neither reflects the widest inside dimension nor the amount of spring action required for the trim to stay in place. Even if you were 100% confident it was correct I'd prefer to not ship (especially to...

Sure:

Sale Pending Pickup, 11-24.

69 Roadrunner GTX bullet fender turn signals Click the link above….I used the rough measurement from this thread after validating it, and later to avoid guesswork, laid out the angle of the holes as shown.