Search results for query: *

And if not experienced I would just do it with a block by hand cuz if you go thru the clear that color looks like it's more than just a solid color , so you'd never match the color by just spotting some color and reclesring . You see it easily, so you have to basically shoot the whole car with...

The use of warm water with a little bit of dish soap in a 5 hal. bucket , then you dip your bottle and fill it up with the soap water have the bottle above your sanding block squeezing water out while sanding serves 2,, purposes, 1 with the soap in the water it helps with sanding by not sticking...

I think you should hand sand it on the final 3000 grit starting from the bottom of the car so you're not putting dirt underneath your paper as you get higher and come down, or sand the whole car with 1000 grit and then respray it with clear again only one and a half to 2 med coats and you'll...

Ok get this , to add more to my failed Crane rockers , twice upon start up ! I called Crane and talked to a gentleman that was in charge of the hardening process and apologized to me saying that they had some problems with the hardening process and that Iust have got some of those that had...

crane sucks for big block mopar with any sort of higher lift cam ! i went thru 2 sets in about 10 mins of running a new motor , junk ! bought Harlan Sharp and 10yrs later no issues !

so wat are you thinking in $ for console w/without shifter , also c chrome fender molding .

my gtx has an electric fuel pump that has had a very similar situation a time or 2 and it stemmed from having extra weight in the back seat and trunk area causing car to squat in the rear somewhat, combined with the fuel pump placement on the car , which made it hard for fuel to be supplied to...

also if you have fender 'C 'chrome left frnt in nice shape , 1 launch to hard on street that resulted in pulling frnt end off ground while slightly turned and i climbed the barrier , so yeah if you have a nice one !

woodgrain, shifter also , trying to put back together wat I thru away in 1977 for a B & M star shifter ! i work nights alot so im sorry if it seems that I take awhile to respond back ! my original one was blue if that helps anything , thanks bret .

LOOKING for left frnt fender 'C' chrome 70 GTX , how much ? Also , 70 GTX automatic console whole thing , and how much ?

I agree, the lobes being that rough would eventually, if not sooner wear out your lifter face ! get rid of it !

I once received a MP purple shaft thru the mail broken in half , or maybe it was for 2, 4 cylinders !

"41 dodge", do you mean like this - the Hemi ? Oh and its a GTX instead of a RR ! My first car and I still have it , bought it in 1976 ! love my first born !

been doing cut and buff for 40 yrs and every one has given you good advice . like stay off the edges , body lines with the buffer and sanding until done with that panel , a good wet sanding will save time and look better than trying to buff out bigger scratches, knowing how much clear you have...

sorry, voltage regulator not voltage resistor !

had a similar thing happen and it was starter relay located under hood on firewall by main harness also make sure voltage resistor is grounded good !

thanks ! so how do i reply to the seller of this part ?

sorry, im old and dumb to this sorta stuff !