Search results for query: *

Hi What is the finish of the bracket under car on driver side for the exhaust hanger that was bolted onto the car What was the finish of the brake line bracket in same gen location that joints the brake lines above the rear end and gets mounted to body? I assume they were just black or grey...

what is the finsish on 1969 Mopar Dodge Plymouth B Body upper control arm camber adjusting bolt Is it natural raw metal or phosphate

Hi what is the correct finish or sheen on K member, torsion bar and swaybar. I assume its satin black

Hey What is the best and most durable paint of finish I can do the exhaust manifolds to finish in cast iron I did mine a few years ago in ceramic coating. They not holding up I have seen cars with nicely restored and finished manifolds. Just don’t know what’s best

Thanks for this very informative description

Anyone one know what shade of gray was used when they dipped these cars in rust proofing. anyone have a spec or a color that I can get Thanks Happy New year

Anyone know where to get a replacement steering wheel harness connector Preview attachment IMG_8582.jpg Gmail Gmail Preview attachment IMG_8582.jpg IMG_8582.jpg 1.8 MB IMG_8582.jpg 1.8 MB

hi I have a question I removed the control arms I got the Moog new bushing I assume I need to press out the old outer housing or flange because this doesn't fit The round outer existing flange look like it one piece with the arm. I know its not How is this accomplished? Press? Heat? Thanks

steer and gear did my other car already. he doesnt do the ball joints or lower control arms but he did the others for me I will send to him again Thanks

Hi Thanks I dont want brand new parts. I want my existing parts refurbished and reused / rebuilt. Can you do that. The company I mentioned i Ohio does that. Paul

Hi Sorry Tri state area 4-5 hour drive from nyc

Anyone know some one in New York area that restore ball joints, tie rod, steering box, etc? I know there is steer and gear in Ohio but he is far to ship heavy stuff too

Hi Can Anyone can recommend what replacement front shocks for front stock setup

Hi What is the correct finish on the horn relay from factory. Some aftermarket ones are sliver like this and they have the black ink diagram on them

thanks

thanks be well

Hi Im just wondering what is the correct oil pressure sending units for a stock 1969 383 4 spd car. I took a snip of this on the forum and posting it. The top image is what I had on the car. Dont know if the dash board cluster matters or not. I have non rally dash in roadrunner I thought he...

Hi What should be the PSI for a stock 1969 383. I want to check each cylinder and just want to know before hand what a healthy stock 383 should be. I know it will vary but Im I looking for 130 psi? or higher Can seems sluggish and want to pull engine out to clean up but may do a rebuilt has...

Hi I need a 1970 holley 4667 or 6191 for 383 4 spd with no fresh air core thanks paul