Search results for query: *

Well, I don’t build 3000hp Hemis, but I knew what the problem with your cam card was as soon as I saw the numbers you posted. If you understand what’s going on with cam data, having the cam card is simply a “convenience”. In any case, the 28/60 numbers, which are @.006, do in fact tell you the...

Gone. That's one reason why we ask pictures be included, not just the link. Edited to show response from Facebook:

Capabilities we need to keep active.

No Dana came std only with 440-4, 440-6, and Hemi. Only could get it with an auto in 1969, 1970, and 1971 IF you ordered the optional A34 package that had 4.10 Dana. People swapped a lot of parts around black in the day.

when I used to do a lot more Mopar fun, I think you got a dana with any Hemi combo or 6bbl. I have seen some 440 manual cars with 8 3/4 rear ends, ?? or that's what I remember.

Dana 60 with 3.54 gears standard with 440, 440-6, Hemi and 4 SPD. Then you have A34 option on top of that to get 4.10 gears.

Nice. Heading to Quartzite?

That's exactly what we did PRheads, but they don't give a Centreline number on the cam card, The 106 is in the instruction manual (as an example) which we copied many times. They give instructions for the centreline method but don't actually print it? Then only give bogus @50 numbers for every...

Welcome from the central coast of Cal.

I'll take them, pm sent

Was the dana 60 standard with the 4 speed and either the 440 or hemi? Seemed to me a lot of my 440 4 speed cars did not have a track pack option.

I have a good 727 , shifts really well. Has been rebuilt but before I got it so I have no history. Also a low mile Gear Vendor OD. I installed this new two years ago and have roughly 4000 miles on it. Works excellent. Also included is the stock tail shaft. $2500 I could separate. I can ship with...

Yes a 74. For about 3 months they made them without a door frame around the windows. That way when you took the top off you only had the windshield. It was a super fun truck.

I wondered if it was a non-licensed fiberglass knock-off body/kit.

I always put this on the cars that I do... Chuck

We stopped using Purples as they was the worst offenders! Followed by Comp cams, but in reality they all seem to fail, in da end... Crower roller is my go to now as Lunati have now gone too... :praying:

I am curious, why? All stock? What issues were you having that lead you to decide to do this conversion? Did this resolve your issues? Was there an actual problem with the original ammeter or ammeter terminals/connections or more of someone said/wrote that that it should be done? Were the...

Getting loaded up!

Check and double check everything, otherwise you will get caught OUT! Life is a tough learning curve for some and others never get a bad cam, crank, rod, bearing, rocker etc, etc, etc.:monkeyleft:

This project is done just in time to escape the polar vortexes and go drive around in the Arizona desert for a few weeks. The bed and table in the foreground fold up flat against the wall.