Search results for query: *

I Definitely wish I would have reinforced them when I had them off, my overhead welding skills, or lack there of will force their removal! It on my future rainy day list though.

I forgot to ask,, who makes the best adjuster bolts? Anyone have experience with QA1's?

When I c-clamped it I went from the rear of lca to the k-frame. It didn't take a lot of force to pull it forward, just didn't make sense that it was back that far. The old T-bar came out pretty easy. I wish I would have reinforced the lca's when I it down years ago! I checked today and there is...

I installed a new set of torsion bars on my 69 Bee. Left side went fine, on the right side the bar did not slide in all the way to it's normal resting point. Upon further inspection I found a gap between the LCA bushing and the K frame. I tried loosening the strut bar, jacking it up, tapping on...

Thanks for all the responses everyone. I agree 100% that it wasn't right, just couldn't figure out why. It is a standard 7290 ujoint but the yoke is not a standard yoke. The Moroso caps I have are designed to be used with the factory yoke, which needs to be drilled out to use the through...

They definitely sit around the cup nicely. I just don't like the amount of gap between the face of the yoke and the cap itself. I agree about the fasteners for sure, the bolts are way too long. Also noticed that the yoke has 5/16 holes but these fasteners supplied are 1/4-20.

I recently ordered a new center section with a 7290 yoke and it did not arrive with U-bolts. It is prepped for U-bolts so my oem straps will not work. Due to time constraints I ordered a set of Moroso 85820. I installed everything today and I don't like the way they fit. Is anyone else running...

Thanks for the response to this! I put it all back together this weekend and it came out good. Grumpy I looked through your pics this morning and I think I have everything, except the turn signal switch and the plate that goes above it as CJ mentioned. I had the old turn signal switch that is...

Unfortunatley I only have the service manual, I would buy a parts manual if i could find one. It's a 69 Coronet.

Hello folks, I need a hand from someone that has been into one of these! I find a breakdown for the column shift in the service manual but I can't find one for my 4 speed. This is how it came out of the car so I don't know what all is missing. I know I am missing the 2 square head bolts and...