Search results for query: *

69 Road runner. I’m to the point of selecting some suspension and steering upgrades but don’t don’t want to go wild to make it a somewhat reasonable driving car with newer radial tires. Just a few thoughts so far are Bergman steering box, Box in LCA’s, total bushing, rod ends and joints...

Love that Green!

message sent

I’ve always had good luck with just the pan. I can see how if things had been milled a lot maybe use gaskets. I have had the intake milled as well to get good alignment. I would think with two gaskets per side, it would be tough to have the port openings line up perfectly.

Hello I am assembling my 66 the shop the car was at replaced the lock cylinder , I was able to find the small rod from the cylinder to the latch , but the shop never attached the rod correctly and left out the lower clip that retains the rod . It is a small flat metal clip , does anyone have a...

I've got a set of 11/67 906 heads...and many other sets of 906 heads. All sets are good complete cores for rebuilding. I'll sell any set for $100. I'm just south of Buffalo NY, 14111

Maybe some dirt got in from gas tank?

Has 195 stamped into it.

I’m going to hang on to it , have too much money and time invested in it. Have some spare parts anything in particular you’re looking for ? Carb is original to car 74 Satellite Sebring Plus 400 4bbl. 4 spd. I’m the original owner.

If the original poster wants to cover the headlight mount. He could try 71-2 Plymouth shields and change the stainless headlight rings to the ones with the tabs.

Maybe making a 3D printing of the doors with the holes for the headlights. Of course a diff. model for 71 and 72

Never mock the afflicted it will come back to haunt you! Sods law says '' if it can go wrong, it will do''. There was a time we trusted the Moparts ''we bought'' and then it all went pear shaped! Think it was the 90's after that, all the NOS stuff was gone...

Sorry I wasn’t clear I did a complete and careful rebuild about 6 weeks ago, installed it and it performed flawlessly cold start idle 1600 and 1000 after warm up. Had it out and about a few times all good. As said car sat till last week ( carb never touched) and now no fast idle. Choke is...

I can’t really make out what’s going on with the lifter in the 2nd pic. I wouldn’t mind seeing another pic of it, after you scuff it up with some scotch-brite. The way it looks on my screen is that there’s a little crater in the middle of the face.

They have their issues too, plus the price.

Or go with a 17" wheel. Lots of tire choices in 17 too. Just don't go any bigger!!! :poke: @Bleep Bleep When I bought my 97 2500, it came with 16's and even back then, tire selection was minimal so started hunting for 17's and found that Hummer H2 wheels had the same bolt pattern. Just had to...

That’s exactly the first thing I thought of. Years ago when I was looking for a 68-70 b body convertible, I came across a small time dealer with a 68 RT …..except it wasn’t. When I mentioned to him that the vin didn’t start with WS ,he had that look on his face. You know the look…..busted...

It does look like the fork pivot has some conflict.