Search results for query: *

I have used this place for just about every little trim, nut bolt, clip, you name it. for my needs!!! Have you tried using them??? cr8crshr/Bill... emojis no workie!!! https://www.mrgusa.com/

Awe Magnum, happy you are doing well!!

I like using the second procedure with the ohm meter to adjust the cable. Mopar Push-button transmission park cable tech tips

I installed shorter bolts.

Did you get your sway bar to go through frame? IIRC, you gad a problem with parking blocks hitting the sway bar.

Everything affects everything else. This along with marginal handling improvement if any IMHO.

Thanks, you always come through :)

You crawl underneath and see if the wire is still on the transmission switch.

I would think a cable adjustment or the switch is dead

As far as motor mounts are concerned, a small block to big block only requires different steel engine brackets.

Is Mad House still being made? What channel/service provider? The program about round de rounders in South Carolina right? Like most of these programs phony drama but they didn't go overboard.

K frame looks intact with no cracks. I pulled the driver side torsion bar out and both ends are lightly greased and slid out easily once I loosened the nuts on the strut bar to lca and lca bushing. How much grease do I need? However, I noticed the paint chips on the big strut bar washers...

"The switch and seal are installed by merely positioning the seal on the switch and threading the switch into the transmission case, tightening to 20-30 foot-pounds. There is no adjustment other than observing the 20-30 foot-pound specification." Mopar Push-button transmission tech tips

Hey BD, where's the swap meet at, and When is it ? Like to check it out...

They stopped enforcing them at all here, limo tint covering every window including the entire windshield is on every other car.

Weld in is best. You could bolt them into position, then weld once in place. Make sure the car is supported correctly beforehand though. Tires/wheels on cribbing, elevated high enough for work clearance or car on a 4 post lift. This way the car is loaded like normal and you can open/close doors...

Hello. I have a 64 Polara with a push-button shifter. It is not activating the neutral safety switch. How do I adjust that??

I've seen the same Cyber truck around here periodically and the tint is so dark you can't see who's inside. I did catch it coming towards me one day and I could see the driver through the windshield. Darken the windows and brighten the headlights!

I looked at a 63 2 years ago as a possible driver replacement for my 04 dually. That thing was a turd despite what was advertised. Glad I eyeballed it ahead of time. Scored a 67 Deluxe a year ago that is a driver.

vison / art / love of cars. thank you sir and gods love and prayers.