Search results for query: *

No , none 4737 Thanks for asking

1/2 price sale Need to clean out parts I won't ever use , 1/2 price sale. Carbs are $50 each, the 67 # 4312 440 carb with broken off idle screw is $25 . Will leave on this site till May 20th , than will e-bay them . This way you have 1st chance .

Ok , ole got back to me. He said their is a lead plug over a allen screw , so I am going that direction , thanks for all the help .

I sent a e-mail to Ole and another shop , Will see if I get any answer back , Will let all you know what I find out , Thanks , Randy

I have a Chrysler shop manual I have had since 1969 , It shows the carb and the pins , but does not mention them , a Carter Book might !

The pins are in the small hole, but screw in . I tried phillips, regular screwdriver , and a slew of allen wrenches and nothing seems to bite . That is why I am fishing for someone who has dealt with them . You would think in 47 years , I wouldn't be the first to have remove them ( but than...

It will act same, the carb is a 1967. It fits 440 or the second carb to a 426 hemi. That is why I don't want to mess it up. Could be a popular carb to someone wanting a correct replacement # 4312s

Dave , I do much appreciate your comments, I too , thought maybe a plug could be over the pin, but cannot get a good enough look to be sure , am afraid if I drill (which will be difficult to stay on small steel pin with aluminum around it) and their isn't a plug , than I have ruined whatever...

Broken off adjuster screw

The mixture screw has a taper , you can back the screw out about 3 turns and than it hits the pin and stops , Someone , might have been me ( had carb for about 30 years ) tried to back mixture screw on out , it broke off . I don't know why Carter did this, but has to be a way to get the pins...

- - - Updated - - -

I hate to disagree , but their are pins holding them in, You can see them and the one broken is out against the pin, I have several avs carbs that do not have the pins , but this one does . Give me time to find a way to enlarge picture .

trying to upload http://media.carcrazycentral.com/data/Photo/carcrazy2_rad93CF_large.jpg click to view Small hole to left where pin is , is hard to see .

I have a afb (4312s ) that has a air idle adjustment screw broke off, I think it was tried to back all the way out, which it can't do ,due to being pinned. Now ,I need to get broken needle out . It looks like a threaded hole for the pin, but no allen wrench , Phillips ,or regular screwdriver...

Yes , I still have it !

the 4640 is sold ! thanks for looking ! Still have the others !

Has a A9 before the number 4640Sa . And yes , I still have it !

No longer have a Mopar , but a 6 pk. is great for looks and can run ,but is bad about vapor lock and hard to bring out of the hole ( falls flat on 2 barrel and lights up tires on all three . Just my opinion after owning 2 .So if looks are what you are after , go for it , if performance...

I have a 4312 Carter AFB ( 67 440 ) and 3 Carter AVS carbs for a 440 , ( 4966, 4968 , and 4640). All have been on a shelf for the past 35 years. Asking $100 each . All have easily removed screws. Pictures are of the 4640 SA. Please advise if any questions or pricing is too high . All will...

Hi everyone ! I am in Hillsboro ,Ohio which is 60 miles east of Cincinnati and 60 miles south of Columbus. I am a old Mopar past owner . In order , I owned a 1966 Belvedere II with a 383, 4speed , a 69 Dart GTS 383, a 70 Cuda 440 6 pk. a 68 barracuda 318 2 barrel 4 speed , a 70 AAR Cuda ...