Search results for query: *

Great. That's what I did. Thanks

I have a 1966 Coronet and need to replace coil wire. Can I make a coil wire from a spark plug wire or is coil secondary lead a different type of wire? Thanks!

Classic Industries. $371.99. Both say arriving soon, but you can call and ask about ship time. Links below Tinted https://www.classicindustries.com/product/1966/dodge/coronet/parts/db3589t.html Clear https://www.classicindustries.com/product/1966/dodge/coronet/parts/db3589c.html

I've seen the plastic glue-on covers. Plastic looks like cheap junk compared to vinyl. My opinion is spend the $ and do it right.

At least according to this Reddit source, it's an A833 because H3 C99128 body. Looks butchered. Was input shaft cut off? What happened to tailshaft housing? Does it have any Chrysler symbols? Number of shift levers on opposite side?

I'm in the over 60 club. Flexibility is lacking for me. With this cold weather, flexibility is zero. When it warms a little, I'll probably rock the dash shell toward the steering column, reach through at the front window, and remove the speed nuts.

OK, I have to remove the windshield on my 1966 Coronet 2-Door Sedan. I also want to replace the dash pad. I have a new dash pad on order from Classic Industries. Since I will have the windshield out, is it easier to replace the dash pad with the dash shell out of the car? Or should I leave the...

Channel Felts, posted for reference from 64 SportFury Cat Whiskers Mopar 1966 1967 B-Body $140 Herb's Parts: 1966-67 B-Body 2 Door Sedan Belt Weatherstrip Catwhisker Set, Belt Weatherstrip / Catwhiskers, 6667RW21 $120

Hi Fury Man, 66 Coronet 2-door Sedan. Please give me a link for those fuzzies. Thanks Front Channel Fuzzy 27.5 inches Rear Channel Fuzzy 22.75 inches My 66 Coronet 2 Door Sedan (waiting for snow to melt)

Hi, did you use IVR4? Thanks IVR4 Limiter List - rte

I have used Jeff Woods for 3 mopar headlight motor rebuilds. 214-755-0332 [email protected] He is in Texas. Really nice guy.

Thanks for stating the knuckles are the same. Kern Dog said "Same relative spindle position." As to height, this sounds like a ratio for distance between spindle center and top of knuckle vs. bottom of knuckle Example Regardless of unit of measurement of height. Say the OEM distance from top of...

Thanks for all the advice, but my question remains about front end height. Is the 73 A-body knuckle shorter than 66 b-body knuckle?

I thought I was using @YY1 terminology (like at 10" torque converter is really 10.75") My mistake. So is the 1973 A-Body Steering Knuckle same height as stock 1966 B-body steering knuckle?

Yes. 1973 A-body 4.5 inch lug, 10.75 inch rotors. A-Body OEM knuckle/spindle, calipers, caliper brackets. Nothing aftermarket.

Suspension Height Question: If a 66 Coronet is converted to front disc brakes using 1973-1976 A-Body knuckles and calipers, does that change the suspension height? If so, how much in inches lower or higher? Would A-body alignment specs be required to align the car? Thanks, Ben

Damn, my 1970 Fury is only 5" longer. Never knew that a 1964 Polara is only 5" shorter than a c-body.

Factory paint is burning for me, regardless of primer or clear. Frustrating

OK thanks. If I use them on my 70 440, I'll let you know the results on valve cover protection. I'm going to try Rustoleum 2000°F on the valve covers first and see what I get. Hope I don't have to remove the HP exhaust manifolds and replace the gaskets

Do the MS 90425 gaskets protect the valve cover paint? Thanks, Ben