Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If you used a stock computer from the donor vehicle, how would the PCM in the vehicle maintain a proper air/fuel ratio?
I am unsure.... would the engine stay in closed loop? Would the Air/Fuel ratio be essentially preset and not continuously adjusted as I understand that they are with a...
That is funny...I was thinking the same thing! You can be cavalier and even ballsy when it isn't as hard to replace what breaks!
I've thought the same thing about trying parts here that are of unknown history.
Transmissions though, they are not like engines where I'd wonder more about valve...
I think I like the pedals better with no trim on them. Today I took the trim off of the parking brake pad and gas pedal and I like it that way.
PG Classics?
Thanks for the tip. I just ordered a pair. They should be here well before Spring Fling in Van Nuys!
Ha, yeah… when I was still working, you knew I wasn’t an office guy when you shook hands with me. The last 5 years though mine have been developing cracks and splits in the colder weather. I have tried a variety of lotions and balms but nothing works 100% other than sitting on the couch.
Screw...
If I cut too much, I expose some of the ugly inside that is usually hidden. The ignition pushrod is one thing.
That is on the left side. If I cut too much of the collar off, it will be visible through the drivers door.
I still shake my head at the way the ignition switch is in the GM...
With every project that involves making a part designed for ONE car fit a DIFFERENT car, there will be obstacles to making it work. I expect those but sometimes there are things that pop up that you didn’t think of.
The wiring looked to be the hard part but thanks to some helpful members, that...
ALL 68-70 Chargers are worth money. For a shop to estimate a measly $10,000 value, they are clearly out of touch with the market. Cars that are relatively complete but need a LOT of work often get listed for over $20,000.
What sets the 1970 apart are the one year only parts that are harder to...
There were 400 4 speeds built for cars and even trucks.
I have a 440 in a 75 Power Wagon that originally had a 4 speed. It has a forged crank. The 400 4 speeds may have as well.
This topic REALLY needs to be discussed in greater detail in the political forum. The most accurate answers would be directly related to moves or actions by highly influential people and that stuff is a hornet's nest in the General forum.
An equally interesting question might be to look back...
The E body K member will physically fit, there is a slightly different angle for where the steering box attaches. The 71-72 B and 70-74 E K members were supposed to have a unique center link to accommodate it but I have used an E body K member in a 70 Charger with no problems.
If you can weld...