Search results for query: *

Lifting the door to move the latch up some? I haven't tried that yet. I am about to start pulling the seat out, and you probably already know, I will have to pull the driver seat out first to keep from damaging it as I get the passenger seat out. So, I will try jamming a pry-bar under it and see...

OK, Thank you for the reply. I hear your concern for damage. FYI This car is almost 100% a survivor. There's almost no rust at all anywhere except a hole thru the outside metal behind the Left Rear tire way down in the bottom 2" to 3" of the rear quarter. It has a vinyl top, and it has rust...

OK, tnx for reply, I think you mean to use something to pry it some from the edge after I push in on it. I can try that. It is so jammed tightly against something, but not the car, that I figure it must be something in the striker area, like something moved out of place and rolled over top of...

OK, thanx for the reply, I don't like to damage anything either, but in this case if it's minimal and I can fix that after I get the door open, well that's two steps forward and one step back, so it's worth it if it's easy. mpb

Hi, I shut the passenger door on my 69 Sport Satellite and it got stuck. It will not open. It's not all the way closed, I can see it's not flush with the body on the outside, but it's tight, it won't budge, no shake, rattle or movement at all. I weigh 300+Lbs and I can't get it to move at all...

Hi Evan, I'd like to give my 2¢ worth on the 318 poly. I got one out of a 64 Polara wreck that was bone stock with a 2 bbl and put it into a 64 Valiant with no changes except a duel point distributer and duel exhaust. However I did give the car a 4.11 suregrip 8 3/4". I live near Detroit...

Dave, Dead mouse in the oil pickup screen? I once heard of a chevy guy dropping roller bearings into another guy's intake manifold and they got all the way into the cylinders. A piece of cardboard or paper/ plastic, something may be plugging the pickup screen. Put your drill drive back in and...

Hi, Moparben here, I used to have a HEMI 4 speed as factory installed in my 69 GTX. The only thing I can tell you is if it is a HEMI trans it will be an 833 and have 18 splines on the input shaft. CALL Brewer's they should have something to tell you from the picture if anyone can.

I am looking for help in finishing up a semi-restored pickup. I have recently lost my mobility and trying to get it back which is taking most of my time and energy holding up progression to finish of my 1976 Dodge Power Wagon. It needs some body work mostly in re installing the box and...