Search results for query: *

1969 coronet convertible 318 auto / standard original dash. I have removed the instrument cluster. When checking continuity on the circuit board, I get a continuity reading on any pin when checked at any light bulb connection or at the fuel gauge or temp gauge. Readings at the pin to gauges...

1969 coronet 500 convertible, standard dash. No dash lights. Pulled the switch panel plate out (that's another story) and have the dimmer switch out. Is there a bench test to determine if the dimmer switch is operative ? I've got full voltage at the top terminal connecter (14.5 v, that is...

what is the correct installation depth of the rear bearing on a roundback alternator ? Should it sit flush to the rear case ? Pic 1 is current alternator where bearing sticks out about 3/32 from rear case Pic 2 shows inside of rear case where bearing is flush to inner case Pic 3 is previous...

When the brakes are applied, the brake light bulbs and all turn signal bulbs light up. When the brakes are applied and the turn signal is activated, the brake bulbs light up, all the turn signal bulbs light up, and the selected left or right turn signal bulbs flash. When the flashers are...

While disconnecting the headlight harness connection from the sealed beam, I created an arc and now the headlights do not come on. I previously read that the headlight switch contained a circuit breaker . Is there a breaker that can be reset in/on the switch ? The manual says to remove the...