Search results for query: *

I purchased the headlight relay system from @Crackedback a while back for a 1964 Polara and am just getting around to installing it. I've read in other posts that instructions were included however I can not locate them. I tried messaging him directly but his inbox is full. Would anyone be...

I ordered a nice new package tray from Classic Industries. The pre-punched holes for the two attachment clips are in the wrong spot which isn't a big deal. My big question is do I need to install the tray before or after I install the rear glass?

Has anyone ordered a front brake line set from Inline Tube that actually fits? I ordered a compete set of fuel & brakes lines. The fuel & rear brakes lines were PERFECT and easy to install. The front break lines are not even close to fitting. In the drawing on their website it shows the brake...

I was wondering if there is a decent quality AM/FM after market replacement radio for the 64 Polara that fits the dash frame reasonably well?

I was hoping to be able to reuse the steering column on my 64 Polara but coupler is just shot. I also know that rebuild parts are non-existent. I would like to keep the original steering column and I am hoping there is a simple solution like using a different coupler. Please help! Thanks ...

I purchased a 4-speed pedal setup for my 64 Polara a long time ago and I am just getting ready to install it. I started by getting it cleaned up and painted but when I started to examine it it a little more closely I realized that I may not have the correct assembly. I appears as though the...

I need help with the floor pan fitment on my 64. I have it in place and it fits very well everywhere except for where the tunnel meets the rear floor pan. I have tech screws in there put still can not get it to align very well. The gap is anywhere between 1/4 & 3/8. Any suggestions would be...

I have the new floor pan temporarily set into place and the tunnel hump positioned in what I believe to be the proper location. It appears as though I will need to cut the floor pan beyond the cross member to install or am I missing something? Will I need to cut/install the hump before I weld...

I am so confused. I am planning to convert my 64 Polara from a push-button to a 4-speed. I am gathering parts and researching as much as possible but I am still getting confused. There appear to be A833 transmissions with different tail shafts on them. In looking at some of those...

I'm kicking around a few ideas for a new/replacement gauge cluster in my 64 Polara. I really want to keep it looking "kinda" similar and was hoping to find a rectangular speedometer and perhaps the other gauges as well. I've done a bunch of searching and all I can find are round ones ...

I spend a lot of time at swaps (as do we all) and was always amused at those guys who wear pictures of their parts on their backs and stroll around. It just kinda always struck me as funny that they were too cheap to rent a space like everyone else. Last weekend I was hiking around the local...

I would like to install some retractable (3 point) front seat belts with the shoulder harness but my 2-door hardtop was never designed to accommodate them. I know that I can get the hardware for mounting the shoulder harness along the roof rail (that's the easy part) but I am concerned that it...

I recently purchased a very stock 1964 Polara 2dr Hdtp and am wrestling with the best approach on the restore. It is absolutely an original numbers matching car with a 383 2bbl, power steering, push button and factory A/C. Here is a photo .... Mechanically I will keep it as original...