72 Pacer
Active Member
Just about to change the 10 inch drum to 11 inch on the 8 3/4, how much of the 10 inch internals are interchangeable between the 10 to 11 inch brake set up?? as I have never done this before? any help ?? thanks
10 to 11 inch brake conversion
- Thread starter 72 Pacer
- Start date
- Local time
- 9:17 AM
- Joined
- Mar 10, 2010
- Messages
- 30,835
- Reaction score
- 54,697
- Location
- Hanover, Pennslyvania
Not very much, maybe the adjuster, maybe a couple springs. You'll need to change the backing plate to a 11" one. And the 2" and 2-1/2" width drum backing plates are different.
72 Pacer
Active Member
Oh, thats something I never checked, thanks for that
- Local time
- 9:17 AM
- Joined
- Jan 29, 2018
- Messages
- 20,998
- Reaction score
- 73,281
- Location
- Midland Ontario, Canada
Why.... won't buy you an ounce of improvement.
j-c-c-62
Well-Known Member
Well, it will increase moment of inertia on each wheel, and unsprung mass, both normally considered negatives.
It will also increase braking power (approx 20% increase in friction area), and heat absorption for long and/or repeated stops.
However, tires stop the car, brakes only stop the wheels.
In a panic stop, the difference in say only 2 feet in total stopping distance can be a lot of mashed sheet metal, and an ounce of prevention being worth a pound of cure still holds very true IMO
Similar threads
