WTB 1962 Plymouth bench seat.

[Savoy109]

Hello everyone. This is my first post but have been looking at this site for years. I'm in need of a bench seat for a 1962 Plymouth savoy 2 door. Next to impossible for finding parts. Thanks

 

[KENTON]

Welcome to the forum, I have lots of 62 stuff. No seat tho.

 

[Savoy109]

Thanks for responding. I have pretty much all the parts I need. I do need an under the dash wiring harness. Mine has been splice more than I would like but could repair it. I've had the car for 31 years and would like to put it back to stock as much as possible minus engine, transmission and gears. Lol...

 

[Savoy109]

I would be also interested in a good front lower valance.

 

[Derv]

I would be also interested in a good front lower valance.

I have a bad but workable front valance, also looking for bucket seats, split bench

 

[Savoy109]

I have a bad but workable front valance, also looking for bucket seats, split bench

I have front valance that needs to be work too. I'm have to just put my brother or dad on it. They are both body men.

 

[KENTON]

I’ll have to check on the valance. My extra harness is for a Dodge. They are not the same.

 

[FU64RY]

Hello everyone. This is my first post but have been looking at this site for years. I'm in need of a bench seat for a 1962 Plymouth savoy 2 door. Next to impossible for finding parts. Thanks

I have one been re done in blue.
Next to impossible to ship.

 

[fuely62]

I would be also interested in a good front lower valance.

Good luck on finding a decent one. There is a member on here that reproduces a fiberglass one.

 

[Goldencommando]

I have a 62 bench seat, cost to ship it would probably be a killer.

 

[kdtjb]

Hello everyone. This is my first post but have been looking at this site for years. I'm in need of a bench seat for a 1962 Plymouth savoy 2 door. Next to impossible for finding parts. Thanks

Good luck on your search. I paid 1000 bucks for mine plus 175 Greyhound for shipping. 62 stuff is pricy. But my friend that does tri five chevys made feel OK, he said their original front split bench seats are 12-1500 and there are more of them than our 62 seats.

 

[FU64RY]

Hello everyone. This is my first post but have been looking at this site for years. I'm in need of a bench seat for a 1962 Plymouth savoy 2 door. Next to impossible for finding parts. Thanks

Are 63's the same?

 

[KENTON]

Are 63's the same?

62 Savoy are 60/40 or 40/60 however you say it. 63 Belvedere are 50/50 can't remember if I've seen a 63 Savoy.

 

[FU64RY]

I have one of each 60/40 and 50/50.
Could be shipped greyhound, I guess.
The 60/40 one needs recovered.

 

[Derv]

here is the one i have

 

[Savoy109]

View attachment 579724 View attachment 579724 View attachment 579725 here is the one i have

I have one that looks some what like that. I'm probably going to repair the one I have. Thank you for responding.

 

[Savoy109]

I have one of each 60/40 and 50/50.
Could be shipped greyhound, I guess.
The 60/40 one needs recovered.

What is a 60/40 and a 50/ 50? I don't car about a factory correct seat. I'm not building a show car. I just want a nice bench seat.

 

[FU64RY]

Okay! then I have two 50/50 fronts seats both are very nice one is blue and the other is black.
Send me a Pm and we can go from there. Either one will fit your 62.
The 60/40 correct for your 62 seat is all there but will needs recovered.

 

[Savoy109]

Okay! then I have two 50/50 fronts seats both are very nice one is blue and the other is black.
Send me a Pm and we can go from there. Either one will fit your 62.
The 60/40 correct for your 62 seat is all there but will needs recovered.

I don't know how to Pm.

 

[Savoy109]

Okay! then I have two 50/50 fronts seats both are very nice one is blue and the other is black.
Send me a Pm and we can go from there. Either one will fit your 62.
The 60/40 correct for your 62 seat is all there but will needs recovered.

I figured it out.