WTB 1964 dodge 330 440 cowl section

[aussiecharger]

Hi - chasing a top cowl section for a 1964 dodge 330/440.
I know they repro the drivers side but they don't do the passenger side.
First option would be complete top section.
Second option would be the passenger side top section.

Example pictures
Cheers

 

[FU64RY]

repo D sides do not fit for s---

 

[Moparmarty50]

I’m working on parting a ‘64 4 dr. Polara (Texas car) that was complete when I got it. Fairly solid car and will look closer and take pics this weekend. You anywhere near Ohio?

 

[aussiecharger]

I’m working on parting a ‘64 4 dr. Polara (Texas car) that was complete when I got it. Fairly solid car and will look closer and
UOTE]

 

[aussiecharger]

Hi - I am down under - Australia.
But please if you can let me know what
you have and send thru some photos
we'll work something out to see about shipping
over to Australia.
Cheers,
Joe.

 

[Moparmarty50]

No problem Joe. I figured you may have been from down under but was hoping otherwise. Will get pics this weekend.

 

[Moparmarty50]

Joe, got pics today. Driver side has some rust as seen in pics. Don't know if you can or want to use. PM me if still interested. Thanks.

 

[Moparmarty50]

Center section is surface rust, passenger side good.

 

[aussiecharger]

Hi Marty - thanks for getting back with the pictures.
Yes I would like have it.
Can you work out a cost for the part and to ship out to Australia.
My postal address is:
25 Burwood Road, Munno Para West, South Australia. P/code 5115.
I can pay thru paypal - that would be easiest.
Thanks,
Joe Davoli.

 

[Moparmarty50]

Should have it out next weekend. I'll send more pics then and price. Got some home remodeling going on around here so be patient. Cheers!

 

[Moparmarty50]

Joe, this should be the straight piece you asked about. It has a secondary piece that the center bottom of the grill mounts on. Also the piece that the hood latch hooks to is bolted to it. The piece(s) pictured are out. Have grill and fenders off. Hope to finish cowl removal this weekend.

 

[aussiecharger]

Hi Marty - yes they are the parts - also need the hood part - the hook.
May also need the hood catch/latch piece too.
Cheers,
Joe

 

[Moparmarty50]

Hi Joe, didn't see this rust out until removed windshield. Still want it? No problem if you don't - I wonder stand. Still have center grill piece for you.

 

[aussiecharger]

Hi Marty, what does the passenger side look like?
I probably will take it as it is better than what I have. Would you be removing it from the spot welds?
Cheers,
Joe.

 

[Moparmarty50]

Joe, one more evening and I'll have it out. Entire firewall done. Need more plug cutters. Will send pics when out.

 

[aussiecharger]

No problems Marty,
Thanks,
Joe

 

[Moparmarty50]

Joe, it's finally out. Note the driver side window channel didn't make it. Thanks for your patience. Pics are here. If you need more let me know. Safety latch pic is for center grill pics. Have other hood latch piece if you still need. If you want cowl and/or center grill support pieces let me know what you are thinking on price. Like to get this done first before boxing and pricing. Thanks!

Can only add 10 pics at once. Four more on way!

 

[Moparmarty50]

Remaining pics....

 

[aussiecharger]

Hi Marty, $150? Plus shipping. For the cowl, the center grill support, and the hood catch. Plus the shipping cost out to:
25 Burwood Road, Munno Para West, 5115, South Australia.
Also can payment be made by Paypal?
Cheers,
Joe.

 

[Moparmarty50]

Sounds good. I will start preparing a box for all and get back with you on shipping. PayPal fine. Will send PM with PayPal address and cost. Check if you need the hood latch also with the hood catch.