WTB 1964 Polara Convertible rear interior side panels

[JFK3]

Hi - looking for a set (I only need the driver side) of rear interior panels for a 1964 Dodger Polara. Started my project and need this. I am in South Carolina (29691). Thanks!!

 

[Wyatt]

Hi - looking for a set (I only need the driver side) of rear interior panels for a 1964 Dodger Polara. Started my project and need this. I am in South Carolina (29691). Thanks!!

Good luck with your project! I look forward to seeing it when you're ready. I believe there is a 'big' Mopar guy in SC, maybe Georgia. And maybe, he's only mechanical. Do you know him? I can look for his name if you don't of him already.

 

[JFK3]

Thanks - I do not know him. I reached out to some Mopar only salvage yards with no response. Ill keep looking!!!

 

[440 4 speed]

Hi - looking for a set (I only need the driver side) of rear interior panels for a 1964 Dodger Polara. Started my project and need this. I am in South Carolina (29691). Thanks!!

I have one red one, don’t remember which side, it is the piece that goes up against the bottom of the quarter glass if I remember correctly. Will have to find it.

 

[Dave6T4]

Try Clay Kossuth in Missouri.

 

[JFK3]

I have one red one, don’t remember which side, it is the piece that goes up against the bottom of the quarter glass if I remember correctly. Will have to find it.

Hi - thanks. I need the driver side. The panels were off when I bought the car. I have two sets of front door and one passenger rear - no driver side rear. For a convertible

 

[JFK3]

I have one red one, don’t remember which side, it is the piece that goes up against the bottom of the quarter glass if I remember correctly. Will have to find it.

And its for a convertible. I cant seem to find how to "edit" the original post?

 

[440 4 speed]

And its for a convertible. I cant seem to find how to "edit" the original post?

Yes it is a convertible,

 

[Wyatt]

Thanks - I do not know him. I reached out to some Mopar only salvage yards with no response. Ill keep looking!!!

I believe this is the guy. Joe Suchy Mopar @ 770 964-4441 in Georgia. Also, and I'm about to go on it myself, 1962to1965mopar.com. Happy hunting!

 

[JFK3]

Yes it is a convertible,

Thanks!! Hopefully you have that side (or both!)

 

[JFK3]

I believe this is the guy. Joe Suchy Mopar @ 770 964-4441 in Georgia. Also, and I'm about to go on it myself, 1962to1965mopar.com. Happy hunting!

Thanks -

 

[Dave6T4]

Joe Suchy is mostly Plymouth parts. That panel is different between Plymouth and Dodge.

 

[JFK3]

Try Clay Kossuth in Missouri.

I called twice - left a message. No call back (been two weeks)

 

[440 4 speed]

Thanks!! Hopefully you have that side (or both!)

I only have one and it is red. Have had a snowstorm since last night. Should be able to look for it tomorrow after clearing snow. No guaranties.

 

[Sixpaksteve]

JFK3 - Those convertible rear side panels for our '64 cars are [nicely] reproduced and sold by ABC Moparts. Have a look at them here.... 1964-65 B Body Convertible Side Panels-Black
Not sure if they would sell you only one side. I purchased a pair of their red ones a few years ago and then picked them up when they were vending at Carlisle. They look great but I have not installed them yet since my project isn't that far along.

 

[JFK3]

I only have one and it is red. Have had a snowstorm since last night. Should be able to look for it tomorrow after clearing snow. No guaranties.

No problem - I appreciate the effort. I have the two hard plastic pieces with armrest/ash tray - I need the vinyl panel with the metal part that cover/hooks onto the side of the quarter window (where the fuzzy weatherstrip is) that the plastic piece goes on (like the front door panel just for the rear)

 

[JFK3]

JFK3 - Those convertible rear side panels for our '64 cars are [nicely] reproduced and sold by ABC Moparts. Have a look at them here.... 1964-65 B Body Convertible Side Panels-Black
Not sure if they would sell you only one side. I purchased a pair of their red ones a few years ago and then picked them up when they were vending at Carlisle. They look great but I have not installed them yet since my project isn't that far along.

Thanks - Im sounding stupid in my post - its the panel (vinyl) section. I found some on "Pro-fit" but I need the metal bracket section that the panel is adhered to as well

 

[JFK3]

I only have one and it is red. Have had a snowstorm since last night. Should be able to look for it tomorrow after clearing snow. No guaranties.

Good morning - wondering if you had the chance to see about the rear panels for the Polara convertible? Thanks -

 

[440 4 speed]

Good morning - wondering if you had the chance to see about the rear panels for the Polara convertible? Thanks -

Got it out yesterday, quite nice, as mentioned it is red. Bad news, it is the passenger side.

 

[440 4 speed]

Hopefully this works