WTB 1966 1967 quarter window glass tracks and hardware - convertible

[TommyBoyGTX]

So as it turns out..... on this 67 Tommy Boy project the 1/4 window tracks and hardware were all missing. I have the glass channel, just missing all these other pieces. From everything I see and know this is all the pieces needed. Looking for a complete left and right hand side set. 66 and 67 should be the same.....I assume.

 

[Dave6T4]

I put a complete tinted glass setup out of a 1966 Satellite into my 1967 R/T many years ago. I recall that there was a difference between the two years in how the glass attached to the risers. It works if everything is changed as a unit. '66 glass will not attach to '67 risers, and vice-versa.

 

[TommyBoyGTX]

Ok....just so we are talking the same things here are you saying the "risers" are these pieces here?

 

[Dave6T4]

It's been about 35 years. Is that what the glass attaches to? If I remember correctly, the '66 glass is bonded into a metal piece that attaches to the mechanism. The '67 glass is deeper, with through holes in the bottom. It attaches to the mechanism with plastic pins.

 

[moparmarks]

66 and 67 are different.
Also H/T and convertible regulators are different.

 

[TommyBoyGTX]

Ok yes.....hardtop and convertible are for sure different.

moparmarks.....the photo you posted I assume is the hardtop 1/4 glass you are showing? Showing the difference between the two years?

 

[moparmarks]

Ok yes.....hardtop and convertible are for sure different.

moparmarks.....the photo you posted I assume is the hardtop 1/4 glass you are showing? Showing the difference between the two years?

Yep. H/T glass. Just showing the mounting difference.

 

[Dave6T4]

Thanks for vindicating my old memory, moparmarks. '67 on the left.