SOLD 1966 Coronet 4 door

[Moparbrad]

Parting what’s left. If you don’t see it in the pics, it’s probably not there.

good fenders $150 each
Good poly 318 and 727 $500 pair
Complete grille assembly $250
Right side trunk floor extension $100
Arm rests and bases, driver side arm rest is cracked $50
26” radiator/core support $150
Front Inner fenders/inner structure $150 per side
Manual steering box $100

Car is located in Phoenix, AZ.
Can deliver parts to Des Moines Iowa in early May

 

[Moparbrad]

More pics

 

[spoolinhard]

How is the floorpan?

 

[Moparbrad]

Fronts have been poorly patched, so considered no good.

 

[theman440]

I'm interested in the RT inner fender & core support -

 

[Moparbrad]

I'm interested in the RT inner fender & core support -

No problem, they’re still there!

 

[theman440]

On your way to Des Moines will you be passing thru Las Vegas?

 

[Moparbrad]

Wasn’t planning on it. You’re north west of me. I’m going East/north east.

 

[65AFX]

Looking for the 90 degree clips that holds the inside front windshield upper headliner trim. There are 4-6 of these along the upper front windshield gutter. Attaching photos. Its the greenish clip in the photo.
I'm in Phoenix so can pick up.

 

[Moparbrad]

Sorry, no clips on this car.

 

[Moparbrad]

Still lots left. Will be scrapped soon. Floors are junk for the most part.
Poly and trans $400
Fenders $150 each
Complete grille assembly $200
Any metal needed I can cut it off
Complete doors $50 each
Will be in Iowa May 2nd and can meet anywhere near Des Moines.

 

[69b3rt]

I need the rear frame cross member where the bumper bolts on.

 

[Moparbrad]

I need the rear frame cross member where the bumper bolts on.

it’s still there and in good shape $150

 

[69b3rt]

it’s still there and in good shape $150

I will buy. Messaged you.

 

[Moparbrad]

Front inners are $100 each.
Passenger side had a small buckle at the bottom that has been dollied out. No rust holes
26” radiator core support $150

 

[Sam69sat]

Looking for the firewall and passenger side pillar for a friend. Do you have those?

 

[Moparbrad]

Looking for the firewall and passenger side pillar for a friend. Do you have those?

Yes. Shoot me a PM!

 

[Blenheimboy]

I need the rear frame cross member where the bumper bolts on.

made one, not needed

Can u get better pics of small piece of sheetmetal above rear bumper?
thx
Bill

 

[Moparbrad]

Engine and trans sold

 

[Blenheimboy]

made one, not needed

Can u get better pics of small piece of sheetmetal above rear bumper?
thx
Bill

pic and price please? is it solid metal?