FOR SALE 1967 Coronet R/T 440-4 speed Dana 60 3.54 Suregrip AA1 Silver $4200.00 or MOPAR Trade

[knk-mopar-parts]

1967 Dodge Coronet R/T project car. This one left the factory in (AA1) Silver Metallic Paint, with (Y6) Black Viynl Top and (P6X) Black interior. Also (B8B) coded for Black horizontal side pinstripe and Special Buffed Paint. Came with 7.75 x 14 Red Streak tires w/spare. Still has the original fender tag and Certicard with original owners name and adress. I tracked the original owner down and he purchased the car new in December 1966 at Frank Scott Dodge in Joplin, MO. Car has clear Missouri title in my name. It has the Dana 60 in it and has a 1967 440 HP block. There is NO TRANSMISSION-BELLHOUSING OR DRIVESHAFT!!! The C440 HP Block #2536430-8 with a 3-16 Build date, Intake #2806178 cast date 3-10-67, Cylinder Heads #2780915 with 2.08/1.74 valves cast dates 3-10-67 & 3-6-67, carb #4327S (L7) Tag, Has correct air cleaner with correct AFB Base (Air Cleaner is in Rough Shape) The 440 block is standard bore (4.320"). Car has been hit in Driver side Quarter. The Frame rails were not damaged, its just sheetmetal damage. The original 150 speedo is laying in car but is thrashed, it has a 120 speedo in the dash now. This is a resto project!!! Car is located in Bowling Green, MO. $4200.00 or 1968-1972 Mopar Trades considered. Please message me with any questions etc. Thanks

 

[knk-mopar-parts]

Last chance, anybody interested in saving this R/T, before I part it out????

 

[superstockmopar]

PM sent

 

[knk-mopar-parts]

PM replied

 

[baracus]

Hope someone buys it, that is an awesome ride.

 

[knk-mopar-parts]

Ok its getting parted out!!!! PM me with needs.

 

[69Coronetrt]

Ok its getting parted out!!!! PM me with needs.

I'd like the fender tag, certicard, broadcast sheet or any other factory documents you find.

 

[Moparguy1]

I am interested in the four speed hump if you can cut it out. I want to make my 66 a 4-speed.

 

[knk-mopar-parts]

69Coronetrt I will only sell the fender tag, certicard, clear title, and vin attached to the bare shell of the car. Will not seperate it.

- - - Updated - - -

Moparguy1 the hump has already been cut out, and is ready to be welded back in. PM me if interested

- - - Updated - - -

PLEASE PM PARTS REQUEST!!!!

 

[RT K_line]

PM sent
I'm needing the sail panel chrome for both sides and drip rail molding both sides. Thanks

 

[PP1RT]

Pm sent

 

[page0100]

Pm me with the lowest price you would accept for the whole car and what has been sold since the original post

 

[BBishere2]

I'd be interested in the grille surrounds and the Dana 60 for my '67 R/T

 

[jimmyd]

pm sent

 

[knk-mopar-parts]

PM replied jimmyd

 

[super-bee_ski]

Air cleaner assembly?
PM sent

 

[Jendah]

pm sent

 

[Urbanhick]

Pm set

 

[68427vette]

pm sent for the whole car

 

[Urbanhick]

I received the quarter emblem and 4 speed hump yesterday. Was as described and packed very well. THANKS!!!!!!