Charger Too
Well-Known Member
Where does this seat belt holder attached to? Is it
for the front or rear seats? I need to know the exact location. Thanks!
1967 Dodge Charger Seat Belts
- Thread starter Charger Too
- Start date
Charger Too
Well-Known Member
So it bolts on the rail right inside the door, and it does not bolt on the seat, correct? Thanks!
Dako
Well-Known Member
It bolts to the floor...bolt goes thru it, and the seatbelt...into the floor...front seat...outside of driver, and passenger seating.
67 Mopar
Well-Known Member
Bad shot, but you can see it here
Charger Too
Well-Known Member
Your plastic holder is a different style than mine as I compare your photo to mine above. Do you agree?
You can see the holder like yours on the passenger side in this picture.
Charger Too
Well-Known Member
Where is the cut end of the seat belt material at when it is fastened around a person? Next to your body or showing on the outside? Thanks
On the outside. So you can buckle the seatbelt and then pull the end to snug it up.
- Local time
- 4:03 PM
- Joined
- Oct 20, 2019
- Messages
- 4,514
- Reaction score
- 4,135
- Location
- Saskatoon Saskatchewan Canada
Interesting that it has 67 seat covers and interior. Someone went to some work apparently.
Yes even the dash frame is 67. I'm going with, it's a 67.
67 Mopar
Well-Known Member
Ayuh... you're right, it's a 67! I had it in a folder with 66 pic's on the PC... should have looked first before sticking my foot in my mouth
Of course, my 67 will have a 66 console, because I like the 66 console better. It looks cooler and it's a lot sturdier (Composite) verses the 67 (ABS) console.
Not that it matters, but this is one from my 67
Last edited:
- Local time
- 4:03 PM
- Joined
- Oct 20, 2019
- Messages
- 4,514
- Reaction score
- 4,135
- Location
- Saskatoon Saskatchewan Canada
RemCharger scabbed a 66 out one of the cars back about 1993. Keep saying I might sell his 67 console.Ayuh... you're right, it's a 67! I had it in a folder with 66 pic's on the PC... should have looked first before sticking my foot in my mouth
Of course, my 67 will have a 66 console, because I like the 66 console better. It looks cooler and it's a lot sturdier (Composite) verses the 67 (ABS) console.
Not that it matters, but this is one from my 67
View attachment 1836872 View attachment 1836873
I have used ABS material to reinforce/ repair them. You could probably put 100 lbs on the back part.
Like the picture.
I actually like the 67 console. I replaced the rear "grill" with one that has the light and lighter. Think it is a big improvement.that makes 2 of us
- Local time
- 4:03 PM
- Joined
- Oct 20, 2019
- Messages
- 4,514
- Reaction score
- 4,135
- Location
- Saskatoon Saskatchewan Canada
Interesting choice of words
Recycled might better apply
Interesting choice of words
Recycled might better apply.
So now you have a car with 4 buckets, 5 ashtrays and 3 cigarette lighters?
Probably no one smokes in the car!
Actually replacing the lighter on the dash with a hood release from a 66. The ashtrays are mainly for storage of USB plugs for the other lighters.
Similar threads
