• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1969 Plymouth Sport Satellite - 318 auto, buckets with console

Status
Not open for further replies.

Lilone

Member
Local time
12:13 PM
Joined
Apr 14, 2010
Messages
22
Reaction score
1
Location
Baldwin WI
Feedback: 0 / 0 / 0
Contact seller
I am selling my 1969 Sport Satellite. It has a 318 in it, that was rebuilt some time ago. I believe it to be numbers matching. The car has power steering and manual brakes. It has headers, exhaust, new intake manifold and 4 barrel carb. I have the original 2 barrel carb and exhaust manifolds. It sounds good for a 318! The transmission needs some work as it is slowly leaking out of the pan. I would assume that the motor and trans need a rebuild, but it does drive just fine right now. I put new tires on it less than 200 miles ago. It has an 8 3/4" rear in a 742 case. Open gears, not sure of ratio.

The car is very solid, and in near survivor condition. It is very complete and unmolested. Has all of the wood grain dash pieces with no cracks, console is in good shape. Dash is in great condition. The AM/FM radio works. All of the interior and console lights work. The signal light indicators on top of the fenders work as well.
There is nothing hiding or covered up on the car what so ever. As seen in the pictures, the vinyl top was taken off a few years ago to see the condition of the metal underneath. The only rust I am aware of is the trunk floor has pinholes, the rear window corners are rusted out from the vinyl top, and there are very small pinholes in the quarters behind the wheel that are hard to see without a flashlight. Both of the bucket seats and rear seat need recovering.

Overall it would be a great car to restore, being that it is so complete, has minimal rust, and has not had previous bodywork done, what you see is what you get! I wouldn't be surprised if the build sheet is under the rear seat!


7466994238_824db10b2f_c.jpg

7466984016_2ab7d51c5a_c.jpg

7466982740_e7f6ab6211.jpg

7466984894_53c29e5a44_c.jpg

7466985874_3d45534b2e_c.jpg

7466986964_affdef440f_c.jpg

7466987930_e3bb5a61d7_c.jpg

7466988874_257868ed90_c.jpg

7466989754_aff5a4e1fd_c.jpg

7466991074_942e7a6fba_c.jpg

7466992076_5747d7273a_c.jpg

7466993170_ed1f81f152_c.jpg









Bigger pictures and a walk around video:
http://www.flickr.com/photos/8939175@N04/

Asking $9,500
Located in western Wisconsin

If you want any specific pictures taken let me know and I will get them.

I also have a full AMD trunk floor, AMD rear window corner patches (inner and outer), a fresh air hood, 4 speed console shifter, and 4 speed console top plate (I was going to convert to a 4 speed), all for an extra charge that can be negotiated.
 
Last edited:
Very nice, good luck with the sale. Sport Satties were cool then and are still cool now. Just curious: what trans? Column shift, or floor?
 
Thanks! It's a console shift.

I will add pictures to the original post instead of linking to the pictures.
 
If I get the asking price ($9,500) I will throw in the fresh air hood (no inserts), full AMD trunk floor, AMD rear window corner patches, and replace the current trunk lid with one that has no dents in the rear keyhole.
 
69 Plymouth

Do you have all the chrome for the rear window ? Thank's SMOKEY.
 
Yes, I have all the stainless trim for the wheel wells, rear window, and windshield. They are just currently off the car.
 
Thats a beautiful car! id sure love to grab that one myself, to far away and not enough cash.. This probably wont last long, way to nice and original.. Good luck with the sale..
 
Thanks Ron. Wish I could keep it for myself! I just bought a 68 coronet from someone here on the forum, and can't keep them both unfortunately.
 
Had the car sold, but it fell through.


Price drop to $8,900, or $9,500 with all of the parts
 
were u located? wish i was close to ya id be really interested...
 
really nice ride....been looking for a B-body...im in ky though what state is the car located in? if u had that car up north it would sell fast..
 
The car is in western Wisconsin.

I have had the car at local car shows with quite a bit of interest, and one buyer, but no sale yet.
 
if i could fig a way out to get the car to ky i would buy in a heart beat...not sure how to go about do it...can car be driven?
 
Yes, the car runs and drives just fine. I have driven it to a few car shows that are close to 100 miles round trip with no issues.

I haven't gone through much on the vehicle so I wouldn't trust it for a long distance drive.
 
Are you interested in any trades? I'm tryin to get rid of the three i already have and start with a solid car like this one. I have two solid A-bodies. 73 dart sport with bodywork paint and interior done. 71 demon with perfect underside just needs minor sheetmetal work and a rough 69 roadrunner with fendertag and buildsheet. Just a thought I have around 18-20K invested between the three vehicles. Thanks.
 
Wish I could work something out, but I have too many vehicles the way it is. Sorry!
 
I never would have thought this one would still be here!!
 
It is a sweet ride. I'd like to own it. Maybe my cars will sell soon. Good luck with the sale.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top