1969 Roadrunner suspension questions...

[akers63]

I have a 69 roadrunner and I want to lower it a few inches, does anyone know of a good company that makes lowering suspension? What are some of my best options for lowering the roadrunner?

Thanks

 

[5.7 hemi]

You can loosen the torsion bars some and see how you like that, or get 2 inch drop spindles "$$$", all depends on the route you want to go!

 

[Seax440Dodge]

x2 on what 5.7 said.... depends on how low you wanna go, if it's just a little bit you can get there w/ adjusting the torsion bars

 

[akers63]

Thanks, I'll try it and see if its what I want, like i said i want to go a few inches like 3-4in in the front and 2-3 in the rear.

 

[MarPar]

magnumforce makes 2" drop spindles for the front IIRC

if you wind up dropping the t-bars down, make sure you get an alignment if you keep it that way...or else it will eat the inside tread of your tires DAMHIK

 

[67 coronet]

if your gonna drop it that much you will need the drop spindles.lowering the tortion bar that much will never allow for camber to come back into spec.

 

[benno440]

not sure if this will affect it but make sure your rim will still fit over UCA & brakes if using the 2" drop spindle, all depends on your size of rim i guess,

 

[Propwash]

Hotchkis and I believe PST make lowering blocks for the rear. Just go between the perch on the bottom of the rear axle and the leaf springs. Pretty cheap.