1970 Hood mount turn signals-air grabber

[EV2 GTX]

Anyone have any pics of how the wiring is supposed to be routed under the hood? One of the previous owners cut mine off at the light, under the hood. I'm going to re-install and would like a "correct" look when the hood is open....

 

[tpodwdog]

hi ev....when it stops raining ill get my RR out and get you some pix....speakin of pix i got some 4 ya...let me see if i can do this.

http://s1112.photobucket.com/albums...dwdog/roadrunner/?action=view&current=012.jpg

 

[tpodwdog]

ok...that didnt work like i wanted,,,lets try this

 

[tpodwdog]

"...DAMMIT JIM.......IM A MOPAR FREAK....NOT A COMPUTER GURU"... anyway,,,how do i get pix in this here box????

 

[tpodwdog]

ok,,im not sure what i just did but theres a pic here someplace.....i think................who knows,,,,this site is toooooooo hare to navigate....AINT IT?

 

[tpodwdog]

OK,,,IM RETARDED,,,AND CANT SPELL,,,,,anyway....i fuggered it out all by myself...by the way i have a patent on (ACCELERATUS RAPIDUS MAXIMUS)...so i dont wanna see it on all yinz roadrunners now....ill have to collect royalties ! lmaooooo

 

[moparsteve636]

The wires are routed through the under hood bracing at the rear,will exit above the starter relay.

 

[EV2 GTX]

hi ev....when it stops raining ill get my RR out and get you some pix....speakin of pix i got some 4 ya...let me see if i can do this.

http://s1112.photobucket.com/albums/k489/tpodwdog/roadrunner/?action=view&current=011.jpg#!oZZ7QQcurrentZZhttp%3A%2F%2Fs1112.photobucket.com%2Falbums%2Fk489%2Ftpodwdog%2Froadrunner%2F%3Faction%3Dview%26current%3D012.jpg

ok...that didnt work like i wanted,,,lets try this

"...DAMMIT JIM.......IM A MOPAR FREAK....NOT A COMPUTER GURU"... anyway,,,how do i get pix in this here box????

ok,,im not sure what i just did but theres a pic here someplace.....i think................who knows,,,,this site is toooooooo hare to navigate....AINT IT?

OK,,,IM RETARDED,,,AND CANT SPELL,,,,,anyway....i fuggered it out all by myself...by the way i have a patent on (ACCELERATUS RAPIDUS MAXIMUS)...so i dont wanna see it on all yinz roadrunners now....ill have to collect royalties ! lmaooooo

:rolling:

Thanks for stickin' it out.... went through the same thing....you did figure it out!! Great lookin' bird you have there, look forward to the pics after the rain.....

 

[EV2 GTX]

The wires are routed through the under hood bracing at the rear,will exit above the starter relay.

Thanks Steve...then into the bulkhead disconnect...the right indicator should have a tan lead, and the left a light green lead, leading into the "V" bulkhead connector and the "S" bulkhead connector, respectively? From what I can see in the service manual?