FOR SALE 1971 GTX Numbers Matching 440 Engine NO FENDER TAG, NO BUILD SHEET

[roadrunner57]

• NO FENDER TAG, NO BUILD SHEET
• 
  
• So I purchased this guy a couple years ago with the intent of doing the bodywork, then getting it painted and drive it around with my arm hanging out the window. Unfortunately, I am now two years older and had a couple injuries that most folks my age do not recover completely from. In fact, a couple doctors said, quit doing that stuff!! So I am trying to sell this to someone that would appreciate and coddle it. It is a matching numbers 440 car, engine date coded late 1969. I do not think the transmission matches. This car was stripped and repainted many years ago it looks like and has a little filler for dings and dents. I have a conscience and do not want to mislead or flat lie about anything. So, if interested, please ask questions or better yet, come see it.
• 
  
• It has rust in non typical places that I not have seen while looking around. To me the rust around the door pillars/cowl on both sides are the most difficult.
• 
  
• So here is what I have:
• 
  
• Tilt steering, column shift
• Factory AC
• Chrome mirrors in decent shape
• Hood signal lights
• Rear bumper w/rubber moulding (removed as of now)
• Rear window defogger
• Rocker Mouldings
• Electric windows
• Electric antenna
• The 440 ran but smoked and was told it was valve guide seals
• I did a compression test on five cylinders and they are around 125 to 130
• Automatic transmission
• 8 ¾ rear, not sure if sure grip and gear ratio
• Bucket seats, NO console
• 
  
• The frame rails look good I think (have pics)
• 
  
• The quarterpanels are probably salvageable. The driver side will need a patch panel and the passenger side minor filler. (have pics) Both sides need patching around rear windows but are covered with moulding which I have.
• The driver side front fender is decent but will need a patch panel and has a dent up front (have pics)
• 
  
• The passenger side front fender will need minor filler (have pics)
• Will need front floor pan, have a used rear floor pan
• Will need trunk pan right side, left looks like it can be salvaged
• Both doors will need minor filler
• The roof looks like it had a vinyl top, very possibly was manufactured for a moon roof w/surface rust
• Around both front and rear windshields will need minor filler
• The passenger front door sags. The pillar/cowl will need repaired, probably replaced
• The driver front door does not sag, but will need the pillar/cowl repaired or replaced. IMO these two places are what is BAD. The rest of the body is repairable according to a highly regarded body man
• The hood has surface rust around the 440 callout
• The trunk lid is in nice shape, small dent where it closes.
• Both sides need trunk gutters replaced. I have one side.
• The dutchman panel needs work but I have a used replacement
• The grill and all trim are with the car, all needs some attention though
• Probably 95% of the parts are there, just need some attention.
• Please PM me with any questions and I will get back to you as soon as humanly possible. I have more pics too.
• 
  
• Located in Winchester VA. $18K OBO.

 

[roadrunner57]

......$16500 OBO.......