wcwilliam
Member
Im a lurker, hardly post, but I have seemed to confuse myself. I started messing with my car a few years ago, replacing the wiring harness with one from Painless. Well as we know, that turned into a total rebuild lasting 5 years. Im nearing the finish line, wrapping up the last bit of electrical. Now im to the tail light section.
My question is pretty easy, but iv forgotten. These bulbs are integrated. In each tail light housing there are three bulbs, outside and middle bulb is 1157, and the inside bulbs are reverse 1156. Easy. My question is on the turn signals and tail lights.
Are the outside bulbs on these third gens the tail/turn? And are the middle bulbs, tail/brake? It seems obvious that should be the case, but id rather ask here before I crimp and heat shrink, causing more double work.
Thank you to whomever clears up my silly confusion.
My question is pretty easy, but iv forgotten. These bulbs are integrated. In each tail light housing there are three bulbs, outside and middle bulb is 1157, and the inside bulbs are reverse 1156. Easy. My question is on the turn signals and tail lights.
Are the outside bulbs on these third gens the tail/turn? And are the middle bulbs, tail/brake? It seems obvious that should be the case, but id rather ask here before I crimp and heat shrink, causing more double work.
Thank you to whomever clears up my silly confusion.
