• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1973 Dodge Charger SE 400 P Code

Status
Not open for further replies.
Happy to cut any sections out for anyone who needs patch panels - some structural stuff and areas of the floors are good.
 
I know the battery tray area has some rust. If you send an email address I can send some pics.
 
Driveshaft is spoken for now. Will be listing some other parts individually as they come off. Feel free to email with any needs. Would like to see someone use the structural metal on it that's good (roof, decklid filler, inner fenders and parts of the frame rails are good as is the rear seat well).
 
On the proportioning valve, looking to sell that with the front disk brake setup for someone doing a conversion. If it doesn't go with, I can let go separately.
Would the ft brakes work on a 1960 savoy?
 
Exhaust manifolds there?
 
Yes but selling them with motor. I do have a spare manifold for one side (drivers I believe if that helps).
 
Will be cutting the car up soon if anyone has any requests. I will also be listing parts individually in the parts sections.
 
I couldn’t email you, about the heater box strap. It’s called a support bracket in the picture.

7EC5060F-5ECC-4CEB-BA44-A5E566CE368F.png
 
Ok on the inside behind the box and the firewall. Let me check for you and will let you know
 
Update, car is cut up now getting ready to go to the scrapyard soon. Last call if anyone needs any sections cut. I did cut out the package tray and deck filler and will be listing them along with other parts individually.
 
K frame sold and a few other things. Car is gone now but I have lots of parts left and some salvageable body sections.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top