1974 SE Door Badging OEM Location?

[Gold Rush]

I have searched and searched but there seems to be a number of opinions how far from the door leading edge to set the closest piece. On the driver side that is the CHARGER emblem but on the passenger side it's the arrow.

I think everyone agrees the distance between the A Line and the top of the Arrow is 8.5 inches but the door leading edge to closest emblem is a crap shoot!

Does anyone have a no kidding unmolested '74 SE that would measure both sides for me?

 

[Gold Rush]

I have searched and searched but there seems to be a number of opinions how far from the door leading edge to set the closest piece. On the driver side that is the CHARGER emblem but on the passenger side it's the arrow.

I think everyone agrees the distance between the A Line and the top of the Arrow is 8.5 inches but the door leading edge to closest emblem is a crap shoot!

Does anyone have a no kidding unmolested '74 SE that would measure both sides for me?

I'm a bit surprised nobody has offered up the measurements by now. Probably not a lot of unmolested '74 SE Chargers out there...

 

[ODZKing]

I have searched and searched but there seems to be a number of opinions how far from the door leading edge to set the closest piece. On the driver side that is the CHARGER emblem but on the passenger side it's the arrow.

I think everyone agrees the distance between the A Line and the top of the Arrow is 8.5 inches but the door leading edge to closest emblem is a crap shoot!

Does anyone have a no kidding unmolested '74 SE that would measure both sides for me?

His a friends survivor 73 that he sent me with measurements.
I confess, when I did mine, I evened them up just a bit from the door end, but this was a good guide. I think I did 3 inches.
Hope it helps.

 

[Gold Rush]

His a friends survivor 73 that he sent me with measurements.
I confess, when I did mine, I evened them up just a bit from the door end, but this was a good guide. I think I did 3 inches.
Hope it helps

I'm thinking that is what I'm going to do also. The arrow is just under 3" so that would look symmetrical. Just can't bring myself to have them mismatched a full inch.

 

[T2R9]

You could likley look at 10 different survivors and get 10 different measurements. I would match them so they are symmetrical.