1979 Dodge St. Regis power steer high pressure hose

[Prusakowski]

Thanks for letting an orphan post on the board. I have a 1979 Dodge St. Regis with a 318 2 barrel, no power steering pump cooler....I can't seem to find a hose anywhere. Anyone have a old MoPar part number for it?

 

[SattyNoCar]

Go to rockauto.com and take a look at hoses for a '79 Cordoba with 318.

 

[pnora]

Thanks for letting an orphan post on the board. I have a 1979 Dodge St. Regis with a 318 2 barrel, no power steering pump cooler....I can't seem to find a hose anywhere. Anyone have a old MoPar part number for it?

View attachment 1459667

1979 DODGE ST. REGIS 5.2L 318cid V8 Power Steering Pressure Hose | RockAuto

 

[Prusakowski]

Go to rockauto.com and take a look at hoses for a '79 Cordoba with 318.

Thanks...prior to posting I went to Rock Auto...did a bracket approach....Dodge Magnum, Chrysler Cordoba and others...all the same numbers listed....but somehow my twist and bends don't match up. Been messing around with O'Riely's and Auto Zone....no luck. I give them credit...the local stores ordered each one listed just in case the photo was wrong...but no luck.

 

[pnora]

Those replacement hoses are not OEM so they can look different and still fit. With or without air pump is the only difference. I bet if you get one for your application it will work.

 

[WileE]

Those replacement hoses are not OEM so they can look different and still fit. With or without air pump is the only difference. I bet if you get one for your application it will work.

Exactly. It's not going to "look" identical, but as long as the dimensions & fittings conform without interference, it should work fine.

 

[Prusakowski]

Those replacement hoses are not OEM so they can look different and still fit. With or without air pump is the only difference. I bet if you get one for your application it will work.

Thank you!

 

[Photon440]

By the way Prusakowski, Welcome! Why not head over to the welcome forum and introduce yourself and your car to the others?