2015 Jeep grand Cherokee

[alsant]

I know this has been discussed but can’t find post, anyone give me feed back on motor mounts for JGC 5.7 replacement.

ThNks

 

[5.7 hemi]

If they are t like the 3.6, you’ll need to raise the engine to replace them quite a bit.

 

[Darrah]

I've done them a few times... not the most enjoyable, but there are worse jobs. I unbolt the engine and lift it until there's adequate clearance. I don't really unhook anything else (exhaust, hoses, etc). The first time made me a little nervous lifting it up high enough, but there is enough flex to make it happen.

 

[alsant]

I have my driver side leaking , figure I do both. I could hardly get eyes on it ! Getting to it is baffling me

 

[Darrah]

I have my driver side leaking , figure I do both. I could hardly get eyes on it ! Getting to it is baffling me

Definitely not easy. I did it the first time while also replacing broken exhaust manifold bolts... that was the real nightmare.

The front tires up on ramps give enough access, but everything is tight.

On the upside, it'll probably feel smoother at idle than you can likely remember. Amazing what a different they make.

 

[alsant]

Yeah I have noticed for awhile the idle was rough